Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    ZWave

    View as Grid List
    Sort by
    Display per page

    Square switch box for ZWMCO MH8-FC / MH8-FC4 / MH-S314W

    WIFIWB10WT_P40
    €3.57 incl tax

    SmartThings Hub V3

    GP-AEOHUBV3EU
    €122.99 incl tax
    The SmartThings Hub V3 is the central connection and acts like the intelligent brain of your modern Smart Home. It allows you to connect wirelessly to a wide range of smart devices.
    The associated SmartThings App on your Smartphone becomes the basic control center. The hub connects to your router via Wi-Fi or the included LAN cable and is ready to go in no time.

    Note from Smarthings and Aeotec/Z-Wave Europe:
    "The former Samsung SmartThings Hub has only changed its name. Technically it is the same product.
    There is just a change in branding of this product. Now it is called “Aeotec Smart Home Hub - Works as a SmartThings Hub”.

    Based on a worldwide agreement between Samsung and Z-Wave Europe, Z-Wave Europe GmbH is the SmartThings sales channel for the “Works with SmartThings Hub” and other SmartThings components.
    Therefore, Samsung points customers and prospects to Z-Wave Europe, when they ask for the SmartThings Hub. Of course the user has access to the very large Smart Home Ecosystem, which is based on the SmartThings App."
    Availability: In stock

    Wall Thermostat with LCD display

    ZWSEC SRT321
    €103.63 incl tax €127.46 incl tax
    The ZWSEC_SCP318 is a battery operated wall thermostat. Using a big wheel on the device the user can preset the desired target temperature in the room. By verifying the target temperature with the measured real temperature closed to the device the unit decides how to operate a wirelessly attached power switch that is attached to the heater. In parallel a central gateway of z-Wave control software can set the target temperature using Z-Wave. This enables to realize a time scheduled zone heating. The thermostat itself does not have any internal timers but executes the wireless settings (COMMAND CLASS THERMOSTAT_SETPOINT) and the local setup.

    Schuko Z-Wave dimmer Wall Plug

    ZWEVR AD1472
    €38.68 incl tax
    With the switchable Z-Wave plug adapter AD 1472 by Everspring your lights will become smart. Simply plugged between a wall outlet and a lamp it gives you the possibility to control the light an intelligent way.
    You are already on the way to work and can’t remember if all lamps at home were turned off? With the switchable Z-Wave plug adapter you don’t need to worry. Switch on and off connected lights from anywhere using your mobile device.
    Commissioning is very easy: Activate the learning mode on your Z-Wave control center and insert the Everspring plug adapter in a wall socket. Thanks to the auto mode inclusion you don’t need to do anything else.
    Now you can switch lamps with a load up to 250W conveniently via remote control, smartphone or by intelligent automation.
    Of course you can use the plug adapter as part of an automated scene defined in your Z-Wave Smart Home Gateway to switch your lights on and off or dim up and down.
    Availability: 1 in stock

    Socket module - French plug

    ZWevrAN1576
    €43.05 incl tax
    This device is a switch plug-in and is used between a standard Schuko wall outlet and lamps connected to a wall outlet by cable.
    The unit is rated IP 20 and can therefore be used in dry environments only.
    The unit is included into a Z-Wave network by a remote control, PC software or any other kind of Z-Wave controller. It switches all kinds of loads. Local operation is possible by pressing the button on the device.
    Availability: 2 in stock

    Wall Thermostat with Integrated Relay

    ZWSEC SRT323
    €103.63 incl tax
    SRT323 is a single-box solution with integrated relay that includes time-proportional integral (TPI) software and interoperable Z-Wave radio. TPI controllers have been shown to provide considerable energy savings, compared with traditional heating controllers. The interoperable Z-Wave radio enables you to remotely change the set point, read the temperature or receive alerts. SRT323 is an ideal partner for use with a Z-Wave home gateway for web-enabled apps, allowing remote control of heating from anywhere with an Internet connection. You no longer have to worry about returning to a cold house.

    7 Day Programmable Room Thermostat (Tx)

    ZWSECSCS317
    €129.99 incl tax
    The ZWsecSCS317 is a battery operated room thermostat capable controlling a central heating wirelessly via Z-Wave. It has a built in clock and calendar. This allows the user to adjust different time and temperature settings from the factory default settings. Up to six different time and temperature settings are available in each 24 hour period. This programmable room thermostat has a large display and intuitive user interface, making it easy to set up and use.

    Temperature & Humidity Sensor

    ZWSEC SES303
    €73.75 incl tax
    Secure SES303 is the latest addition to the stylish range of digital environmental sensors. The smart sensor from Secure provides reliable and continuous monitoring of temperature and humidity inside your home, and lets you improve the efficiency of your heating system. The Z-Wave sensor can be integrated easily into your home automation network and configured to be a part of intelligent scenes and scenarios. It can be expanded to work with external wired NTC temperature sensor (SES 001) or pipetank temperature sensors (SES 002 / SES 003). The sensors supports configurable data reporting, and can be configured to transmit the information to an associated device in the Z-Wave network. As the sensor is battery powered, there's no need for external wiring and it can be installed within a matter of minutes.

    Temperature Sensor

    ZWsecSES301
    €73.38 incl tax
    The ZWsecSES301 is a battery operated device which acts as temperature sensor. It uses Z-Wave wireless commands to send its temperature data to a controller. The device is IP 30 rated and can therefore only be used in dry environments. The precision of the temperature sensor is +/- 0.5 degree.

    Z-Wave Presence Detector

    ZWevrSP814
    €36.62 incl tax

    This presence detector using PIR (passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.
    The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered. 

    The device has changeable lenses to optimize the monitoring of the room. A built in 60 db siren can be used if the sensor is in security application mode. A built in light sensor can be used to detect ambient light.

    The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behavior a static controller such as a PC with home automation software or a gateway is required.

    Availability: 1 in stock

    Temperature/Humidity Detector

    ZWevrST814
    €41.76 incl tax
    The ST814 is a combined Temperature/Humidity Sensor which is designed for both desktop use and wall mountable. The device has a local LCD display which either shows the temperature or the humidity. 4 buttons allow switching between minimum, maximum or actual values, humidity versus temperature and Fahrenheit versus Celsius The device can report its values via Z-Wave and allows to set trigger level for direct control of other Z-Wave device when the measured value hits the trigger point. This makes the ST814 a very powerful and flexible tool to measure environmental values and control device within a Z-Wave network.
    Availability: 1 in stock

    Z-Wave Presence Detector

    ZWevrHSP02
    €37.87 incl tax
    Availability: 1 in stock

    1 Channel Z-Wave 7 Day Time Control and RF Room Thermostat

    ZWsecSCP318-SET
    €186.71 incl tax
    The SEC_SCP318-SET combines a 7 day single channel timeswitch with a wireless Z-Wave Room thermostat and can be used for adding an extra zone into an existing installation. Because of its TPI energy saving software the user can start to save up to 10% energy consumption. The Programmer and Room thermostat communicate with each other via Z Wave commands.

    Time control
    The SEC_SCP318 timeswitch will allow up to 3 ON/OFF settings per 24 hours 7 days a week. To temporarily override current settings the device has an 1 hour manual Boost Function, which allows the user to boost the system to be currently OFF for 1 hour, and an Advance Function button, which allows the user to advance the system to ON when currently OFF or switch the system OFF when currently ON. Additionally the device has a programming switch allowing permanent selection of: OFF/ON/AUTO/ALL DAY.

    Room thermostat
    The battery operated wall thermostat has a big adjustment wheel which can be used to preset the desired target temperature in the room in a range of 5°C – 30°C. By verifying the target temperature with the measured real temperature closed to the device, the unit decides how to operate a wirelessly attached power switch that is attached to the heater. In parallel a central gateway of Z-Wave control software can set the target temperature using Z-Wave. This enables to realize a time scheduled zone heating. The thermostat itself does not have any internal timers but executes the wireless settings and the local setup.

    1 Channel Z-Wave 7 Day Time Control and RF Room Thermostat

    ZWSECSCS318
    €199.99 incl tax
    The ZWSECSCS318 is a set which combines a programmable 7 day room thermostat (ZWSECSCS317) with a wirelessly controlled relay switch (ZWSEC_SSR303) used for controlling a central heating. Because of its TPI energy saving software the user can start to save up to 10% energy consumption.

    3xSensative STRIPS Door and Window Sensor

    ZWSNS SENE1301
    €156.58 incl tax
    STRIPS by Sensative is an ultra-thin magnetic sensor designed to monitor and protect the status of windows or doors and reports the data to the smart home controller. To do this the sensor can be mounted almost invisibly on frames of doors or windows. Strips by Sensative consists of two components: The thin narrow strip is mounted on the window or door frame and the small square magnet is mounted on the movable part of the window or door.

    ABUS HomeTec Pro Z-Wave

    ZWABU CFA3010S
    €244.77 incl tax
    The ABUS HomeTec Pro Z-Wave is the ideal solution for house and apartment entrance doors or office or service rooms. Once installed, these doors can be conveniently and easily locked or unlocked via your Smart Home App (requires a Z-Wave gateway). Installing the HomeTec itself is also simple. The maintenance-free and battery-powered drive can be installed safely in a few simple steps and without wiring. The only requirement is a door cylinder with emergency and hazard function that has a projection of 7 to 12 millimetres on the inside of the door. The emergency and danger function ensures that the door can still be opened and closed with the conventional key.

    Chain Drive for Pivot Windows (230V)

    ZWfak_ZWS230
    €365.92 incl tax

    The ZWS230 chain motor is thanks to its small dimensions and suitable force output ideal for roof window operating and is fully compatible with the Z-Wave system. The motor can be used to upgrade centre pivot and top hung and pivot roof windows of different manufacturers.

    The maximum chain reach of the ZW230 is 36cm. The motor is equipped with built-in overload protection which acts as a sensor for correct window closing.

    Double Switch Relay

    ZWWID WDS
    €59.99 incl tax

    WiDom universal Double Switch is an ON/OFF control device designed to independently control two separate loads, suited for use as both a local and remote switch. Similar to the other WiDom “in wall” devices, it can be fully integrated into pre-existing systems and configured to link configurable behaviours to a specific number of clicks, in full interaction with the Z-Wave home automation ecosystem.

    The WiDom universal Double Switch also boasts the lowest energy consumption on the market.

    Energy Monitoring: Each of its two channels features an integrated consumption measurement device.

    Timer Management: Timer management for each independent channel, both switch on and switch off.

    Software Update: You will be able to independently update the device firmware "Over the Air" without even having to remove the devices from their location.

    Extremely low energy usage: In line with the other WiDom products, the WiDom universal Double Switch features the lowest energy usage of all similar devices on the market.

    Intelligent Multichannel: It has two independent channels individually controllable. It can independently control other devices both single channel and multi-channel. For example, you can remotely control the opening / closing of the shutters, to control of dimmable lights, turn on / off remote loads.

    Not all Z-Wave devices support the associations and / or multi-channel associations. When associations are supported, typically are a simple local control reference (if I turn off the local light, I turn off also those associated). With Widom Universal Double Switch you can define the state of local load and the state of the devices associated independently of the load, and you can control them separately activating the recognition sequence of clicks. So you can check the local loads with single click, and the associated devices with double click.

    Ready for installation, but fully configurable: The device is supplied ready for installation but can also be supplied with personalized configurations.

    Energy driven switch shunt version

    ZWWIDEWPSS
    €72.35 incl tax
    The smallest device in its category worldwide, and the only device specifically intended for use both as a Relay Switch with integrated power meter, and as an Energy Meter either at the point of entry of your electrical system, or on a section of the latter. Version S featuring an internal shunt resistor. In addition to Power measurements, the device also provides data for Energy, Voltage, Current and Power factor.
    The only device suited for use with all types of Z-Wave controller, and capable of implementing an active energy-saving management policy defined by the user according to his energy consumption, or to the amount of energy produced by his solar power system.

    Energy driven switch TR version

    ZWWIDEWPSC
    €79.95 incl tax
    The smallest device in its category worldwide, and the only device specifically intended for use both as a Relay Switch with integrated power meter, and as an Energy Meter either at the point of entry of your electrical system, or on a section of the latter. Version C featuring an external current transformer, it is capable of measuring loads exceeding 10 KW. In addition to Power measurements, the device also provides data for Energy, Voltage, Current and Power factor.
    he only device suited for use with all types of Z-Wave controller, and capable of implementing an active energy-saving management policy defined by the user according to his energy consumption, or to the amount of energy produced by his solar power system.

    Frame + double paddle system55

    ZWZME DW7
    €11.07 incl tax
    HK 07 Set composed of frame and double paddle for ZWzmeEWALLC-2.
    Availability: 4 in stock

    Frame + single paddle BJ arcticwhite

    ZWzmeSW2
    €9.83 incl tax
    Bush Jaeger Duro 2000 Set in white composed of frame and single paddle for ZWzmeWALLC-S.
    Availability: 2 in stock

    Heating Thermostat Comet

    ZWEUREKOMET
    €55.35 incl tax

    The Comet Z-Wave Thermostat heats your room right when you need it. So you do not have to enter a cold bathroom after waking up nor a cold home after coming home from work. In addition the thermostat lowers your heating and its costs.

    Thanks to the Z-Wave wireless technology the Comet thermostat can be included into and controlled by your Z-Wave gateway. Set the room temperature from your smart phone: It does not matter if you are on your couch or on the way. Of course you can define scenes in your smart home gateway which regulate the temperature fully automatic.

    As stand alone solution without a Z-Wave gateway you can program up to 6 times for heating or cooling per day. Thanks to “open window” detection the electric thermostat will stop heating as soon as you open the window to air the room and prevents you from throwing your money out of the window. Other functions like child protection, timer function, frost protection and many more can be activated over the menu-driven display.

    The installation does not require any tools and can be performed without any further knowledge – dead easy!

    Just take off the conventional thermostat and install the Comet. No need to drain water. Adapters for most common valves are enclosed in the package.

    HEIMAN Smoke Sensor

    ZWHEI HS1SA
    €40.00 incl tax
    Hopefully, you will never need it, but in case of emergency it will save not only your belongings, but also life. A pot which stands on the stove too long or a forgotten iron…first there will arise smoke, then it will cause a fire.
    The HEIMAN Smart Smoke Sensor owns an accurate capture of smoke and you will alert acousticly and visually. In a serious situation the smoke sensor alerts with a red LED which flashes rapidly and with a noisy alarm. Furthermore there is the opportunity to receive a warning on your smartphone if you are not at home. This prevents a fire emerging from smoke and expensive consequential damages.
    Because of the use of the wireless technology Z-Wave the sensor can be connected to any Z-Wave gateway. Thanks to the latest Z-Wave Plus standard the Smoke Sensor ensures a battery lifetime of 3 years.

    On/off Switch for Everlux

    ZWduw054313
    €19.90 incl tax €74.39 incl tax
    This pattress box insert of the manufacturer Duwi is intended to control all kinds of electrical loads. A 230V powered pattress box is needed for installation. The product consists of:
    • the insert, which can be used with or without local control
    • a special mounting plate to mount the insert into a pattress box
    • a mounting frame for Duwi Everlux series , color standard white
    • the switching paddle for local control of the dimmer

    The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations. It will be included and controlled in a Z-Wave network from a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.
    Availability: 7 in stock

    POPP 433 Bridge - white

    ZWPOPP POP_700700
    €49.99 incl tax
    The POPP 433 Bridge enables your POPP Hub to be connected to RF433 MHz devices (fixed code). Therefore you can connect devices like door sensors and wall plug working with the RF433 MHz technology to your bridge.
    The bridge will be added to your existing Wi-Fi network. For that you just connect with the Wi-Fi of the Bridge and set up all the settings of your local Wi-Fi and your POPP Hub. Afterwards you can add and control the RF433 MHz devices via the Web UI and the App of your POPP Hub.
    As a result the 433 Bridge is perfectly made to create a connection between your wall plugs or door sensors of the 433 MHz technology with your Z-Wave devices. The advantage of the RF433 devices is extended range and wide dissemination in DIY markets and other channels. However devices with 433 MHz (fixed code) do not communicate with encryption, bidirectional or with a security standard.
    The POPP 433 Bridge is only compatible to the POPP Hub or with gateways based on the Z-Way software.

    RaZberry2 - Z-Wave Plug-On Module for Raspberry Pi

    ZWzme RAZ2
    €60.27 incl tax
    The Z-Wave.Me RaZberry turns every Raspberry PI into a Z-Wave smart home gateway. The bundle of hardware and precompiled Z-Wave wireless network management software waits to be completed by your own user interface running in a web browser or a mobile phone.

    The Z-Wave software provides an easy to understand and easy to use interface applying the well-known JavaScript interface technology JSON on a built-in web server. Writing your own home automation apps was never easier and more affordable!

    The RaZberry 2 has an optimized antenna, wherewith the module can achieve a range of up to 200 meters.
    Availability: Out of Stock - on backorder and will be dispatched once in stock.

    The Soft Remote - Cozy White

    ZWNODECRC3601
    From €44.90 incl tax

    The NodOn® Soft Remote can control any kind of Z-Wave compliant receiver (standalone mode) such as the switchable plugs, blind controls and dimmers. In addition it is able to trigger scenes/actions via a Z-Wave compliant home automation gateway (gateway mode).

    Spill and shock proof, the Soft Remote can be used anywhere in the house. Its embedded magnet allows to fix the Soft Remote everywhere, from the heater to the fridge door.

    USB Stick incl. Z-Way Controller Software

    ZWzme_EUZBWAY
    €89.95 incl tax

    This USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network.

    The device already contains a license to run Z-Way, the certified Z-Wave Controller software available for various operating systems and platforms.

    This stick and Z-Way work with all certified Z-Wave devices regardless of its vendor or date of origin. Just plug in the USB stick to your Windows or Linux machine or Raspberry Pi and download Z-Way.

    In short UZBWAY = UZB1 + Z-WAY

    Wall Thermostat with LCD display plus actuator

    ZWSEC_SRT322
    €78.41 incl tax €104.55 incl tax
    The ZWSEC_SCP318 is a system to control warm water heating in general and floor heating installations in particular. It consists of a battery operated wall thermostat installed in the room to be controlled and a relay switch to operate the water boiler. The thermostat can be manually operated by the user or remotely operated via z-wave to set the desired temperature level.

    Transmitter

    The ZWSEC_SSR303 is a battery operated wall thermostat. Using a big wheel on the device the user can preset the desired target temperature in the room. By verifying the target temperature with the measured real temperature closed to the device the unit decides how to operate a wirelessly attached power switch that is attached to the heater. In parallel a central gateway of z-Wave control software can set the target temperature using Z-Wave. This enables to realize a time scheduled zone heating. The thermostat itself does not have any internal timers but executes the wireless settings (COMMAND CLASS THERMOSTAT_SETPOINT) and the local setup.
    Availability: In stock

    Wallswitch with Single Paddle TZ36 - Z-Wave Plus

    ZWTKB TZ36-S
    €47.97 incl tax
    The wallswitch is a switch, which has one relay module integrated. The wallswitch has a single paddle. The relay is able to switch one electrical load with max. 1380 watts. With the shift paddles or Z-Wave you can control the connected electrical load .

    The wallswitch can be easily connected to a electrical load without installing a flush mounted module separately. The relay is located inside a module, which is directly connected to the wall switch with 2 paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Wallswitch with Single Paddle TZ56 - Z-Wave Plus

    ZWTKB TZ56-S
    €47.97 incl tax
    The wallswitch is a switch, which has one relay module integrated. The wallswitch has a single paddle. The relay is able to switch one electrical load with max. 1380 watts. With the shift paddles or Z-Wave you can control the connected electrical load .

    The wallswitch can be easily connected to a electrical load without installing a flush mounted module separately. The relay is located inside a module, which is directly connected to the wall switch with 2 paddles. With that TKB Home wallswitch you can replace any switch insert or toggle switch. The wallswitch can be mounted on any flush box.

    With the TKB Home Wallswitch you can easily make your installed light smart and connected. The wallswitches can be connected to every Z-Wave system. The automation of your lamps and lights has never been easier than before thanks to Z-Wave. Without installing and wiring and cables can different devices with each other.

    Z-Uno V2 - Z-Wave Board for Arduino

    ZWZME EZUNO
    €59.48 incl tax
    Z-Uno is the first and only easy to use developer board that allows you to create your own Z-Wave device without deep knowledge of Z-Wave protocol or programming. Z-Uno is a mix of Z-Wave home automation radio protocol power and Arduino simplicity. Being inspired by Arduino project Z-Uno inherits all concepts of easy-to-use hardware and software solutions, keeping maximum flexibility.
    Z-Uno is a fully DIY product. It is made for those who are limited by existing choice of Z-Wave products and wants to extend their smart homes with more sensors and actuators: connect LEDs, buttons, switches, motors or any low voltage sensor including most of Arduino compatible sensors.
    Z-Uno programming is done by writing sketch in simplified C language and loaded into Z-Uno using Arduino IDE. Many examples and comprehensive tutorials will help you to make your own project.
    Being Z-Wave Plus certified device, Z-Uno is the perfect companion for you RaZberry gateway. Z-Uno is compatible with other controllers too: among them Fibaro Home Center 2/Lite, Vera Edge and Zipato Zipabox.

    Z-Wave controlled Boiler Actuator

    ZWSEC_SSR303
    €76.31 incl tax
    The ZWSEC_SSR303 is a wirellessly controlled single Relay switch to operate loads up to 3 A / 230 V. It is used to control warm water boilers or magnet valves. The device can be operated locally using two buttons. A LED indicated the current switching status. The fashionable design of the device allows mounting it on visible positions in the home.

    Z-Wave controlled Boiler Actuator - two channels

    ZWSEC_SSR302
    €85.10 incl tax
    The ZWSEC_SSR302 is a wirelessly controlled double Relay switch to operate loads up to 3 A / 230 V. It is used to control warm water boilers or magnet valves. The device can be operated locally using two buttons. A LED indicated the current switching status. The fashionable design of the device allows mounting it on visible positions in the home.

    Z-Wave Dual Paddle Wall Dimmer

    ZWtkbTZ65-D
    €48.57 incl tax

    The TZ65-D dual wall dimmer is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.

    Beside the local switch the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device. Tipping one time or two times the switching paddle performs the control. The left paddle controls the local load while the right paddle remotely controls Z-Wave associated devices only. The association of further Z-Wave devices needs to be done by a Z-Wave controller. The unit is powered by 230V power and needs a pattress box with 230 V power wires for installation. The unit is shipped completely with electronics, switching paddle and mounting frame in arctic white HomePro style. The mounting frame can be replaced by another mounting frame of the HomePro switching series. The unit is designed for use within a 3-wire system, which means that a neutral wire (blue) is needed for operations.

    Z-Wave Outdoor Solar Siren

    ZWPOPE005107
    €249.90 incl tax

    The PoPP Solar Outdoor Siren is a self-sufficient siren for Z-Wave security systems. Due to its large solar panel it can be used without any additional power supply or batteries. The siren can be installed on any place on the outside of the house and can be controlled using Z-Wave. This way it extends security systems and calls attention in case of a triggered alarm. The siren issues a very loud sound (105 dBm) and in parallel some stroboscope light.

    All communication between the Z-Wave controller and the siren is encrypted and secured to protect against manipulation.

    Z-Wave Plug-Dimmer

    ZWbenPlDi
    €48.90 incl tax

    The BeNext Plug-in Dimmer is an easy to install product, which enables to control and measure appliances up to 150 Watt while taking care of your favorite intensity of light during a particular moment of the day. It is totally up to you. The Plug-in Dimmer has the capability to determine the electricity consumption and to show these values in the BeNext application. The measured energy usage is stored in the internal memory. The Plug-in Dimmer can be controlled locally by the On/Off push button or from a distance with your tablet, PC or smartphone (Android, IOS, Windows).

    Z-Wave Plus - Octan Remote - White

    ZWnodECRC3100
    €59.90 incl tax

    Mobile remote control or wall switch? As of now you don't have to decide for one.

    Z-Wave Plus Wall Switch - White

    ZWnodECWS3101
    €54.99 incl tax

    With the NodOn wall switch, you can control Z-Wave devices such as lamps, window blinds or switchable sockets directly (stand alone mode). Connected to a smart home gateway it is also possible to activate defined scenes by push of a key.

    Z-Wave Plus Wall Switch - White/Grey

    ZWnodECWS3102
    €54.99 incl tax

    With the NodOn wall switch, you can control Z-Wave devices such as lamps, window blinds or switchable sockets directly (stand alone mode). Connected to a smart home gateway it is also possible to activate defined scenes by push of a key.

    Z-Wave temperature sensor

    ZWDAN RS-Z
    €92.25 incl tax
    This Z-Wave device is used as a central temperature sensor for heating or cooling solutions with multiple actuators. The measured temperature is displayed. Two buttons allow to overwrite the setpoint temperature. It can be used as Z-Wave stand alone temperature sensor or to control heating, cooling of ventilation devices. The overwrite can be terminated for certain hours. After this time the setpoint temperature will go back to the redefined value.
    Beside the two front buttons the device has one more button on the top side. The use of this button wan be defined by the central controller. Possible functions can include a temperature boost (heat up as soon as possible) or the activation of a energy saving mode.

    Z-Wave USB Stick

    ZWZME UZB1
    €39.98 incl tax

    This USB Stick connects a PC or any other computing platform with USB interface to a wireless Z-Wave network.

    A third party controller software compatible to the Sigma Designs Serial API is required to use the functions of the device. The third party software plus this UZB realize a static controller to manage and use Z-Wave devices of various vendors.

    This stick works with all certified Z-Wave devices regardless of its vendor or date of origin. The Sigma Designs Serial API specification is available to all owners of a Sigma Designs Z-Wave SDK.


    Please note that this product does not contain a license to run Z-Wave.Me’s controller software Z-Way. You can however upgrade the stick to accommodate this function using a licensing key ZWzme_ZWAYLIC.

    Z-Wave USB Stick

    ZWvisZU1401
    €36.99 incl tax
    he Vision USB-Stick is a Z-Wave USB dongle. When attached to a host processor, it becomes a Z-Wave communication device, which exposes the Zensys API (SerialAPI) through integrated USB. The primary function of the device is to allow a host processor to control up to 232 Z-Wave devices using the Z-Wave technology protocol. Within the Z-Wave wireless network the Z-Stick acts as a static controller with enhanced (SUC/SIS) network management function. In order to use the full functionality a software application such as Z-Cloud or Z-Way is needed to run on the host. Z-Stick supports all kinds of third party software complying with the Zensys Serial API.
    Availability: 1 in stock

    Door/Window Sensor

    ZWVIS ZD2102-5
    €35.20 incl tax €44.00 incl tax
    Zipato’s Door/Window Sensor consists of sensor and a magnet. One piece mounts on the door/window frame, and the other mounts on the door/window itself. When the two components separate, sensor reports that door/window is open. When used with Zipato home automation controllers it can be part of any automation scenario created using Zipato Rule Creator. It can be used either to detect intruders or to automatically trigger other Z-Wave devices when activated Like all Z-Wave devices displaying the Z-Wave logo, Zipato Door/Window Sensor can also be used with various Z-Wave networks and controllers, regardless of the manufacturer.
    Availability: 2 in stock

    Flow Stop gas/water shut-off controller

    ZWPOPE009501
    €129.99 incl tax

    Overflowing bathtubs, leaking washing machines or defects to gas and water pipelines – damages can occur almost anywhere and cause immense costs. The POPP Flow Stop can prevent this – thanks to Z-Wave. Flow Stop is a motor operated shut-off controller for automatic flow stop of gas and water pipes. It is equipped with Z-Wave technology. This means it is particularly suitable for use in smart homes.

    Even installation is child’s play. The POPP Flow Stop is delivered completely including valve control/motor, power supply, mounting and Quick Start Guide and is easy to assembly on the existing ball stop valve. In doing so, all usual pipe standards, including ½ ” and ¾“, are possible. On this occasion no pipes must be dismantled or even water must be drained. That way the installation is normally done in 5-10 minutes.

    The POPP Flow Stop is driven by a motor and closes the ball valve mechanically. Even though the Motor requires only 12 Volt (1A), it has a high power output as well as high torque, which reliably closes the ball valve in just 10 seconds. Also a manual closing of valve is easily possible in case of power failure – thanks to the clutch release bearing.

    Once the Flow Stop is added to a smart home gateway via Z-Wave, the stop valve can be operated via any PC, notebook, smartphone or tablet. Additionally, in the event of leaking gas or water the smart home gateway – when combined with sensors – is able to stop a further inflow automatically and thus protects against more extensive damage and further danger.

    The POPP Flow Stop is a good piece of security for the intelligent home defending from nasty surprises and high costs due to gas and water damages.

    Hub Z-Wave PoPP

    ZWPOPE008900
    €199.00 incl tax

    The PoPP Hub is the central head and brain of the smart home made by PoPP. It utilizes the Z-Wave wireless technology to control all smart devices in the home. It is used to control different single devices as well as complete defined scenes and actions combining device functions within the network.

    It needs only a few steps to get your PoPP Hub up and running. Add devices such as switches, lights, thermostats, door locks and various sensors to your home network and define automated scenarios (e.g. „All-off“, „Coming Home“, different light scenes).

    Control all devices in your smart home by wall panel, key fob remote control or with tablet, smartphone and desktop pc by using the internet connection to the PoPP Hub.

    POPP Keypad + ABUS HomeTec Pro Z-Wave

    ZWUE700045S
    €289.00 incl tax
    POPP Keypad + ABUS HomeTec Pro – the innovative door opener for your smart home

    The POPP Keypad in combination with the ABUS HomeTec Pro Z-Wave provides its owner more comfort, control and flexibility. With the pluggable Z-Wave door lock drive, apartments or front doors can be smartly opened and locked.

    Never worry about forgotten keys anymore. Never lock yourself out again. With the Keypad each of your family members gets an own access code.

    The installation of both products is comfortable and easy. It only requires a door cylinder with emergency function, which has a projection of 7 to 12 mm on the inside of the door. Both devices are battery powered. They can be installed with a few simple steps without any wiring.

    This article contains 2 products: ZWABU CFA3010S + ZWPOPE700045

    Popp mains adapter

    ZWPOPE004100
    €19.99 incl tax
    This optional available power supply allows external powering (220 V) of your Popp Smoke Sensor (ZWPOPE004001).
    Plug the terminal in the connection jack on the backside of the device and then connect red wire with plus pole of your Popp mains adapter and the blue one with minus pole. Now you can plug the Load- and the neutralwire into your Popp mains adapter and the device is ready to use. Nevertheless please do not remove the battery.

    POPP Z-Rain

    ZWPOPE700168
    €79.99 incl tax

    You want to be informed when it starts raining and your windows are still opened? Or you want to control your garden watering intelligently and you want to note the rainfall as well? The POPP Z-Rain enables this in your Z-Wave Smart Home.

    The Z-Rain has an internal rocker, where the rainwater is collected until the weight of the water tilts the rocker. The tilting will be registered from a reed sensor and counted as well. Based on that the rainfall will then be calculated.

    With the first tilt of the rocker and therefore right to the beginning of the rain you will receive the first value from the Z-Rain. Then you can get a push-message or E-Mail, if one of your windows is still opened and your awning will close automatically.

    The great advantage of the Z-Rain is, that it not only detects rain but also measures the exact amount of rain. A small little shower is not always a reason to close your side windows. You can also configure the value of rain, when you want to be informed about the rain. During a rain fall the Z-Rain reports the amount of rain every 1024 seconds in m3 (total sum of the rainfall), mm per m2 and mm/h (current strength of the rainfall) to the Smart Home Gateway. When the rainfall stops, the last measured value will be sent to the gateway. Afterwards the value will become nil again. With that you can turn off your garden watering with the beginning of a rainfall and turn on the next watering cycle based on the measurements of the last rainfall.

    Thanks to Z-Wave and the operation with two standard AAA batteries the Z-Rain can be placed anywhere in your garden. Because of the integrated battery booster technology, the Z-Rain could possibly have lifetime of up to 5 years depending on the wake-Up interval.

    Radiator Thermostat STELLAZ

    ZWeurSTELLAZ
    €55.23 incl tax

    StellaZ is a wireless Z-Wave controlled actuator suitable for heating, ventilation and air conditioning systems.

    Sensor, controller and actuator are combined in a single device to allow a self-sufficient energy-efficient room control.

    The device has four different modes (Normal, Energy saving, Frost protection, direct valve control via Z-Wave) to control and regulate the temperature. It is also possible to readout the temperature via wireless Z-Wave requests.

    Open windows are automatically detected and lead to a temporary reduction of the heating power to save energy.

    Scene Master

    ZWREM ZRC90
    €49.99 incl tax
    The Scene Master is a Z-Wave controller which can trigger actions and predefined scenes in a Z-Wave control center. Therefor the device has 8 single buttons and a status LED.
    The Scene Master will be distributed with wall mount where it can be took out for use as portable remote control.

    Secure Z-Wave controlled Boiler Actuator GEN5

    ZWSEC SSR303-5
    €89.00 incl tax
    The Secure SSR303 Gen 5 is a wirelessly controlled relay switch to operate loads up to 3A/230V. It is used to control warm water boilers or magnet valves. The device can be operated locally using two buttons. A LED indicated the current switching status. The fashionable design of the device allows mounting it on visible positions in the home.

    Sensative STRIPS Comfort

    ZWSEN SENECOMFORT
    €59.99 incl tax
    The STRIPS Comfort by Sensative is an ultra-thin sensor designed to the temperatur and the light level. Because of its ordinary design the sensor can be mounted almost invisibly on walls or ceilings in the middle of your rooms. Just as well you can use it outdoor.
    In combination with other Z-Wave devices the STRIPS Comfort enables a energy safing way of life and it generates more comfort within your own four walls. If you combine the temperatur and light sensor with the Roller Shutter the blinds or shutters are closed automatically if the temperatur goes above what you desire. So you control the climate in your rooms and secure your furniture at the same time.
    The STRIPS Comfort surprises with its design as well as with its battery which has got a lifetime up to 10 years. Furthermore the strip can alert you if the temperature or the light level reaches above or below a defined value.

    Smart Combustible Gas Sensor

    ZBZIP hm-hs1cg-m.g
    €40.00 incl tax
    Used for detecting combusting gas leakage and preventing danger caused by gas leakage. It also can be used as Z-Wave repeater to extend wireless transmission distance.

    Temperature probe

    ZWSEC_SES001NTC
    €7.84 incl tax
    The SES 001 is an external temperature probe especially selected for use with our ZWSEC_SIR321.It is easy to fit and extends the capability and performance of our comfort control systems. The probe is integrally moulded into a thermoplastic elastomer casing that is flexible, resilient and waterproof.

    The EnOcean® Metering Smart Plug

    ASP-2-1-11
    €44.90 incl tax
    The EnOcean® Metering Smart Plug can control your appliances, and monitor their energy consumption!

    The EnOcean® Multifunction Relay Switch

    SIN-2-1-01
    €49.90 incl tax
    Control everything you want, from a single actuator: lights, heaters, boiler, garage door, etc… and finally make your home smart.

    Z-Wave Door Lock without Handle

    ZWvisZM1701
    €256.89 incl tax

    The ZM1701 is a Z-Wave controllable door lock that fits into standard European doors.

    The door lock can be applied for doors from a thickness of 38 mm and up. Since the lock is just a single dead bold lock it will not replace modern three dead bold locking outer doors.

    The door can be locked and unlocked using the inner side turn piece and/or the key pad. The wireless control allows to lock/unlock the lock, set/unset up to 15 different key codes (4...8 key long) and to limit the validity of certain key code.

    Z-Wave Switch Plug for Schuko 500 series

    ZWTKB TZ68-G
    €44.90 incl tax
    The Z-Wave Switch Plug for Schuko 500 series is a Z-Wave Plus certified switch plug that can be placed between a wall outlet for Schuko Plug and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A blue LED indicates the switching status.
    Availability: 1 in stock

    POPP 433 Bridge - black

    ZWPOPP POP_700717
    €49.99 incl tax
    The POPP 433 Bridge enables your POPP Hub to be connected to RF433 MHz devices (fixed code). Therefore you can connect devices like door sensors and wall plug working with the RF433 MHz technology to your bridge.
    The bridge will be added to your existing Wi-Fi network. For that you just connect with the Wi-Fi of the Bridge and set up all the settings of your local Wi-Fi and your POPP Hub. Afterwards you can add and control the RF433 MHz devices via the Web UI and the App of your POPP Hub.
    As a result the 433 Bridge is perfectly made to create a connection between your wall plugs or door sensors of the 433 MHz technology with your Z-Wave devices. The advantage of the RF433 devices is extended range and wide dissemination in DIY markets and other channels. However devices with 433 MHz (fixed code) do not communicate with encryption, bidirectional or with a security standard.
    The POPP 433 Bridge is only compatible to the POPP Hub or with gateways based on the Z-Way software.

    Sensative STRIPS Door and Window Sensor

    ZWSNS SENE1110
    €57.99 incl tax
    Strips by Sensative is an ultra-thin magnetic sensor designed to monitor and protect the status of windows or doors and reports the data to the smart home controller. To do this the sensor can be mounted almost invisibly on frames of doors or windows. Strips by Sensative consists of two components: The thin narrow strip is mounted on the window or door frame and the small square magnet is mounted on the movable part of the window or door.
    Strips is 19,5cm long and only 3mm thin, is Z-Wave Plus certified and can also be used outdoors. Its built-in battery has a life time of up to 10 years.

    Smoke Detector with Siren (battery for 10 Years)

    ZWPOP E009402
    €89.95 incl tax

    The Z-Wave smoke detector detects resulting fire and smoke emission reliable. In case of emergency it alarms acoustically and sends alarm signal to Z-Wave network so that all other smoke detectors in range can be alarmed. That ensures that the alert also reaches people in all floors as well as in the night while they are sleeping. Thanks to Z-Wave wireless technology you can define further actions triggered by the smart home control center in case of an alarm. To enhance safety, escape routes can be highlighted with automated lighting and unlocking or locking of shutters and doors.

    Thank to its integrated 10-year battery the smoke detector can be used for legally prescribed lifecycle without replacing the main battery. The Z-Wave module‘s battery can be replaced with just a few simple steps when the device informs the control center about low battery status. Low Z-Wave module battery has no influence to the smoke sensors functionality.

    This device is the first smoke sensor with Z-Wave which has the Q-label (Vds 3131) for extended quality.

    Beyond these functions the Z-Wave smoke detector can be used as an independent indoor siren which can be integrated into an existing security system. Within your Z-Wave smart home network the smoke detector can be connected to other sensors such as door and window contacts or motion sensors independently from a control center. In case of an alarm the acoustic signal will be different from the signal in case of fire.

    Battery powered wireless wall controller

    ZWPOPE700861
    €51.04 incl tax
    With this battery wall controller you can control your smart home from everywhere in the room, because the flat switch can be positioned on and removed from every planar surface without laying or pay attention cables. Switch the lights, the heating and window blinds with only one touch of a button. Using the wall controller is as simple as using an ordinary light switch – but with significantly more functions.
    The device could be used as primary controller and secondary controller as well. With the buttons 3 and 4 new Z-Wave devices can be added to the wireless wall controller. Equally you can remove devices from your Z-Wave network.
    Due to primary controller function you can use the battery wall controller as standalone remote control as well without using any smart home gateway. Devices such as sockets, window blinds, dimmer, lights and electronic door locks can be switched by the controller directly.
    Once one device is added to the wall controller it checks the device type (switch, dimmer,…) and assigns the buttons with correct commands.
    Of course you can also include the battery wall controller to an existing Z-Wave smart home network. Therewith you have the possibility to trigger defined scenes such as the closing of the shutters with simultaneous switching on all lights in the room by only one touch of a button. Or place the wall controller next to your entrance door and start the scenario All of when youre leaving home to switch off al lights and electrical devices you do not need during absence with only one touch of a button.

    Z-Weather

    ZWPOP 005206
    €199.90 incl tax

    Z-Weather is the world’s first energy-automated Z-Wave sensor.

    The multifunctional sensor is powered by a solar cell. Thanks to the energy management and the internal capacitor the wind sensor sends measures to the Z-Wave Controller even during the night. The built in energy manager automatically calculates and sets the wake up interval between 5 minutes (on sunny days) and 1 – 2 hours on cloudy days or at the beginning of the day. Additionally, the energy management protects against full discharging and enables continous operation for reporting gusting wind, storm or dusk in case of emergency.

    CO Detector

    ZWPOPE004407
    €91.02 incl tax
    Carbonmonoxid is posion and can be very insidious. You can not see it, you can not taste it and you can not smell it.
    This product combines a certified carbon monoxide detector with a plug-in Z-Wave module to form a wirelessly reporting carbon monoxide sensor. The carbon monoxide detector is certified according to EN 50270:1999, EN 60335-1:1994 as well as EN 50291:2001 and satisfies all contemporary legal requirements.
    The high-end carbon monoxide detector offers a test button conveniently accessible – e.g. with a broom stick – when mounted on the ceiling. Three colored LEDs on the device indicate Alarm, Error and Battery Level. The Alarm conditions as well as the actual CO level – measured in ppm – are reported wirelessly using Z-Wave. Additionally, a group of actuators can be controlled using the BASIC command class in case the CO alarm triggers. Two configuration parameters define what command to be sent in this case. The device is a secure Z-Wave Plus device and can be used in one wireless Z-Wave network with other certified devices regardless of origin and brand. It supports secure communication if the central controller supports secure communication as well. Even if included securely the device is able to communicate unsecured with devices included unsecure using the association group 2. Beside the Carbon monoxide danger alarm the device will also report a tamper alarm if the sensor is removed from the mounting base. The POPP CO detector with integrated Z-Wave technology helps you to make your Smart Home even safer.

    KEYFOB-C mini 4 Button Remote Control

    ZWPOPE009204
    €36.17 incl tax
    You want to be in control of your smart home? With the KFOB-C remote control you can switch the lights, the heating and window blinds with only one touch of a button. Using the KFOB-C remote control is as simple as using your car key remote control – and it is equally small and compact and suits to your key ring. Furthermore the robust sliding cover prevents involuntary touches of the buttons.
    The KFOB-C remote control could be used as primary controller and secondary controller as well. With the buttons 3 and 4 new Z-Wave devices can be added to the KFOB Controller. Equally you can remove devices from your Z-Wave network.
    Due to primary controller function you can use the KFOB as standalone remote control as well without using any smart home gateway. Devices such as sockets, window blinds, dimmer, lights and electronic door locks can be switched by KFOB-C directly.
    Once one device is added to KFOB remote control it checks the device type (switch, dimmer,…) and assigns the buttons with correct commands.
    Of course you can also include the KFOB-C to an existing Z-Wave smart home network. Therewith you have the possibility to trigger predefined scenes such as the opening of the garage door with simultaneous switching of all lights in your garden by only one touch of a button. Or start the scenario “Good night” which switches off al lights and electrical devices in your house with only one touch of a button when you go to bed.
    Availability: 4 in stock

    logitech harmony hub + command companion

    REMOTE.HUB
    €184.49 incl tax
    Harmony companion, IR Hub to control all your media devices.

    Integration with Z-Wave hubs: Home Center 3
    Home Center 3 Lite
    VERA edge
    Vera Plus
    Vera Secure
    Smartthings

    Compatilbe with Alexa, Google Home, Philips HUE Hub, and any IR (infra-red) controllable device.
    Availability: In stock

    POPP KeyPad

    ZWPOPE700045
    €179.00 incl tax
    The Keypad is the first Z-Wave enabled and outdoor Keypad in the Smart Home world!
    The Keypad can activate and deactivate your security system by using an individual Pin Code. Furthermore you can unlock connected doorlocks without a key but with a multi-digit Code.
    As soon as somebody logs in with his personal Pin Code you will be informed automatically. Because of that you even know while your on the road, when your kids arrived at home. Beside the Keypad does not need a key, which are often lost by kids.

    The POPP Keypad can save up to 20 different Pin Codes. Each Code can have 4-10 digits. Every single Pincode has its own scene ID and can start other scenes. Meanwhile you can also us the different scenes IDs to see, who and when one of the residents came home. Additionally the Keypad has an separated doorbell button, which controls his own scene. That way you can switch on a light and turn down the volume of your hifi system when somebody rings the door.

    The Keypad is protected against tamper and burglar the Keypad has an integrated magnetic sensor. If the Keypad is move unauthorized, you receive a push message (gateway mode) immediately or a siren will be triggered. In addition a separted scene ID is used, when a wrong Pin Code is entered. As a result you know directly when somebody use the keypad unauthorized. An integrated multicolor LED shows, if the Pin Code was entered correctly and informs if the entered Code was transmitted successfully.

    Stand alone and Gateway mode
    The Keypad can be used in 2 different modes. Firstly it can be use in connection to a doorlock or dooropener in the Stand-Alone mode. For that you do not need a Z-Wave gateway because the Keypad is directly associated with the door opener.
    Secondly the Keypad can be used in the Gateway mode. For that the keypad is connected to the Gateway and is shown as a scene controller. Each access code gets his own scene ID. The doorbell button and the wrong entering of code will be shown with own scene IDs.

    ZWave

    Close
    Filter by Clear All
    Min: €3.00 Max: €870.00
    3 870