With the switchable Z-Wave plug adapter AD 1472 by Everspring your lights will become smart. Simply plugged between a wall outlet and a lamp it gives you the possibility to control the light an intelligent way. You are already on the way to work and can’t remember if all lamps at home were turned off? With the switchable Z-Wave plug adapter you don’t need to worry. Switch on and off connected lights from anywhere using your mobile device. Commissioning is very easy: Activate the learning mode on your Z-Wave control center and insert the Everspring plug adapter in a wall socket. Thanks to the auto mode inclusion you don’t need to do anything else. Now you can switch lamps with a load up to 250W conveniently via remote control, smartphone or by intelligent automation. Of course you can use the plug adapter as part of an automated scene defined in your Z-Wave Smart Home Gateway to switch your lights on and off or dim up and down.
This device is a switch plug-in and is used between a standard Schuko wall outlet and lamps connected to a wall outlet by cable. The unit is rated IP 20 and can therefore be used in dry environments only. The unit is included into a Z-Wave network by a remote control, PC software or any other kind of Z-Wave controller. It switches all kinds of loads. Local operation is possible by pressing the button on the device.