The X10 DIN rail switch is a remote controlled relay. Discretely installed at the junction box, it switches hard-wired circuits with several switches (e.g. hallway lighting). The internal relay can be tripped either by external latched or momentary action wall switches or by an X10 controller.
The AD10E responds to STANDARD X10 protocols: "All units off" from any X10 controller set to its house code, regardless of unit code. Or alternatively, by individual unit control using "On" and "Off". When the relay is energized, the LED above the slide switch is illuminated.
The AM19RF ON/OFF Indoor Appliance module from Haibrain® enables you to remotely and wirelessly control your lights and appliances with X10 RF.
The Indoor Appliance module is an X10 RF receiver and is able to receive commands from all RF Transmitters, such as the MS13, SS11 and all other X10 RF controls. The AM19RF converts an incoming RF signal into a direct command (ON/OFF) to your connected light or device.
The AM19RF RF receiver has the same features as the AM17RF. However, the AM19RF is suitable for outdoor use, the lid protects the socket against splash water (IP44). To guarantee that the appliance module is waterproof, we recommended placing the module into a vertically oriented outlet with the hinged lid on top and use an insulated grounding type plug. Secondly make sure the lid is closed when no devices are connected.