Get on board with the RISCO Smart Home, a fully integrated home management solution for the ultimate streamlined lifestyle. It's a winning offer that gives homeowners convenient comfort along with cutting edge technology. It uses the protocol Z-Wave.
Security. Video. Smart devices. Energy management. With the RISCO Smart Home, users can control their lighting, disarm their security system, turn on the heat, and open the garage – all with a single click, from one intuitive smartphone app!
Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it. New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).
FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
The Philio Roller Shutter Controller insert allows controlling motors for jalousies and blinds both via Z-Wave wirelessly and locally utilizing a traditional wall switch. The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Philio insert that is controlling the load. This relay is able to detect the position of the shutter by using the patterned power measuring method. So it can be remote controlled not only fully up or down, but also can be adjusted to e.g. 30% or 50%. And when manual controlled by using the push button, the controller also can memorize the position and send the new shutter position to its controller (ex. IP-Gateway). The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of roller shutter.
Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination. Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.
The Z-Wave Switch Plug for Schuko 500 series is a Z-Wave Plus certified switch plug that can be placed between a wall outlet for Schuko Plug and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A blue LED indicates the switching status.
SRT323 is a single-box solution with integrated relay that includes time-proportional integral (TPI) software and interoperable Z-Wave radio. TPI controllers have been shown to provide considerable energy savings, compared with traditional heating controllers. The interoperable Z-Wave radio enables you to remotely change the set point, read the temperature or receive alerts. SRT323 is an ideal partner for use with a Z-Wave home gateway for web-enabled apps, allowing remote control of heating from anywhere with an Internet connection. You no longer have to worry about returning to a cold house.
The ZWSEC_SCP318 is a battery operated wall thermostat. Using a big wheel on the device the user can preset the desired target temperature in the room. By verifying the target temperature with the measured real temperature closed to the device the unit decides how to operate a wirelessly attached power switch that is attached to the heater. In parallel a central gateway of z-Wave control software can set the target temperature using Z-Wave. This enables to realize a time scheduled zone heating. The thermostat itself does not have any internal timers but executes the wireless settings (COMMAND CLASS THERMOSTAT_SETPOINT) and the local setup.
This module is used for switching On or Off 1 electrical device like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.
With this module can feed your load with the desired voltage because it has a separate entrance for this purpose. item also available in: 908.4 MHz - USA/Canada, México, Chile 921,40 MHz - Australia, Brazil, New Zealand Contact for details on minimal quantities and deadlines for these frequencies