Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar

    Security

    Security disponible en eurox10.com

    ordenar por
    Mostrar por página

    Módulo GSM Universal (doble banda) con batería de respaldo.

    HAI300E
    €121,54 sin IVA
    El módem HAI-300E traduce las señales analógicas y las convierte en una señal GSM. Una tarjeta SIM (prepago o suscripción de cualquier proveedor) tiene que ser colocado dentro del módulo GSM,fácil de conectar con su consola de seguridad SafeGuard Haibrain® u otros paneles de alarma de PSTN, mediante la inserción de un cable de teléfono en las dos entradas analógicas.

    Wireless combined PIR + MW detector

    JA-80W
    €105,00 sin IVA
    The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.
    The detector guards the same way as a classic PIR motion detector.
    When motion is sensed in the guarded area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm report to the control panel.

    Wireless Internal Siren

    JA-80L
    €53,50 sin IVA
    The JA-80L is a component of Jablotron’s Oasis 80 alarm system. It can be used as the following:
    • An indoor alarm siren;
    • A wireless door bell;
    • A detector-triggered chime;
    • A sounder for entrance and exit delay beeps;
    • Thief verification;

    Wireless Outdoor P.I.R. Motion Detector

    JA-60V
    €330,30 sin IVA
    The JA-60V is an outdoor intruder detector designed to detect human body movement in a protected area.

    Wireless Remote Commander

    MCM-140 (868)
    €63,75 sin IVA
    The MCM-140/MCM-140+ is a wireless remote control unit for the PowerMax family control panels. The MCM-140 and MCM-140+ differ in their transmitted ID type and functions.
    1The MCM-140/MCM-140+ enables the user to arm/disarm the alarm system, to initiate emergency/fire/panic alarms, to perform one of the AUX (auxiliary) functions (see Note 2 and 3 in Section 7), to turn lighting devices on and off, and PGM control. The keypad includes an RF transmitter that sends out a differently coded RF signal for each command.
    For PowerMax, the MCM-140 enables activation of the Aux (Auxiliary), seven home control outputs (X-10), one PGM output, Fire and Emergency functions. Each button needs to be individually defined for the AUX, PGM or X-10 functions at the corresponding points of the define panel and define outputs menu of the control panel.

    Wireless Wall Button

    RC-88
    €48,50 sin IVA
    The RC-88 is designed to be a remote control for setting/unsetting (arming/disarming) an alarm system, triggering panic alarms or remotely controlling other appliances. The battery-powered wireless button communicates via OASIS radio protocol.

    Detector inalámbrico de inundación

    EWD18
    €28,41 sin IVA
    Recibe una notificación en caso de inundación y intervenga con el fin de proteger su hogar contra daños por inundaciones. El detector de inundaciones ebode es alimentado por batería y viene con dos sondas que se instalen en lugares donde se espera que el agua va surgir. Cuando detecta agua o condensación el eWD18 activa una sirena (85 dB), como un detector de humo. Se puede integrar en una red X10 (BS800 Homeguard, SC-28 Homeprotector, ProtectorPlus BS880 / BS880 y 4/7), el detector de inundación se convierte en parte de su sistema de seguridad X10 y te permite enviar mensajes de alarma en caso de detección.

    Advanced Wireless PowerCode™ Glass-Break detector

    MCT-501 (868)
    €117,00 sin IVA
    The MCT-501 is a fully supervised digital glass-break wireless detector compatible with PowerMax™ and other Visonic PowerCode™ wireless systems. It is designed for a wide range of residential and commercial applications where reliable glass-break detection is required.
    The MCT-501 employs an advanced patented acoustic pattern recognition technology that can reliably distinguish between true alarms and false alarms. It provides 360o detection range of up to 6m (20 ft) and can detect breaking of different types of glass including plate, tampered, laminated and wired.

    AJAX Button

    BUTTON
    €19,10 sin IVA
    Botón de pánico: notifica a todos los usuarios de una situación de emergencia. Escenario de ejecución: enciende o apaga dispositivos o luces con solo tocar un botón. El botón AJAX tiene dos funciones, que se determinan presionando breve o prolongadamente el botón. Por ejemplo, una pulsación corta envía una emergencia y una pulsación larga enciende las luces.

    MultiTransmitter BLANCO

    MULTITRANSMITTER
    Desde €89,01 sin IVA
    Decenas de detectores y kilómetros de cables ahora se pueden transformar sin esfuerzo en un moderno sistema de seguridad controlado por teléfono inteligente. Reemplazando la antigua unidad central de seguridad, el módulo conecta los dispositivos cableados a un concentrador y los convierte en una parte completa de Ajax. MultiTransmitter es un paso hacia la conciencia y la fiabilidad. Para una empresa de seguridad, abre la posibilidad de configurar el equipo de forma remota, y los usuarios obtienen todos los beneficios de administrar el sistema a través de una aplicación.

    Soportes para Sensor de movimiento PIR

    BRK0A
    €4,99 sin IVA
    Para EL-1100 y EL-2645

    Emergency Button

    MCT-220
    €51,00 sin IVA
    The MCT-220 enables people, for example senior citizens in their home environment, to transmit an emergency call when they are at some distance from their communication unit.

    Flood detector

    LD-81
    €21,50 sin IVA
    The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector. Plug it into the IN1 input terminal (red wire) and GND (black wire). If the detector is triggered (e.g. by a water), it sends a trigger signal. If the detector goes into a stand-by condition, it sends a non-triggered signal. The LD-81 takes its power supply from the JA-81M´s circuit.
    It is possible to use the LD-81 with an older type of detector, the JA-60N, for Profi systems if you insert a 4k7 resistor in series with the LD-81 between the INP (red wire) input terminals and GND (black wire).

    GSM Alarm burglar system

    EPIRw
    €214,70 sin IVA
    EPIR is a security alarm system that works with GSM network.

    Alarm system ELDES EPIR supports CONTACT ID protocol which is required to transmit signals to Monitoring station.

    ELDES EPIR868 (ELDES EPIR version with installed 868 MHz radio transmitter-receiver) can operate as an access point for wireless ELDES devices.

    GSM pager for cars

    DZEUS
    €171,00 sin IVA
    The system DZEUS is a micro-processor device used to remotely observe and control cars, motorbikes and other vehicles through GSM network.

    Internal GSM/GPRS Module for PowerMax Systems

    GSM-350
    €176,25 sin IVA
    GSM-350 is a cellular communication module that connects some of the PowerMax® systems to the alarm central station. The module can report via GPRS* data channel and/or through the GSM network. This enables a high-speed and highly-reliable communication channel in cases of line failure or tampering with the standard telephony lines.

    In addition, it supports remote operation and event reporting via SMS. For any property without land-based telephone lines, the GSM-350 is a must-have. It extends the control panel functionality to any site, such as homes with VoIP-based telephony, anchored boats and isolated vacation houses.

    The module is internal and fits in the PowerMax system, so no additional external elements are needed. The integrity of the backup communication channel is ensured through continuous monitoring.

    OASiS control panel

    JA-83K
    €148,10 sin IVA
    The JA-83K control panel is a modular unit, with 50 addresses (marked 01 to 50). The heart of the unit is the JA-83K main board with 10 wired inputs (up to 30 using JA-82C modules).

    Contacto magnético de superficie

    FC503
    €3,00 sin IVA

    Contacto magnético de superficie.

    Universal indoor wired siren

    SA-913B
    €8,38 sin IVA
    This type of acustic indicator is 12VDC powwered and can be used as a powerful indoor siren.
    Disponibilidad: 2 en stock

    Backup battery for OS-36x sirens

    BAT-4V8
    €14,00 sin IVA
    4,8V 1800mAh rechargeable NiCd battery to be used with the OS-36x wired sirens.

    Sensor de movimiento de Dual-Tecnología (Sensor PIR y Microondas) con inmunidad a mascotas

    LC-104-PIMW-W
    €39,75 sin IVA

    Este detector proporciona un análisis de las condiciones ambientales para todo el espectro de velocidad de movimiento, lo que le permite centrarse exclusivamente en la detección de intrusos y eliminar los factores ambientales que provocan falsas alarmas.

    El análisis de las condiciones está integrado en la electrónica VLSI del detector, asegurando una alta fiabilidad y el uso libre de problemas. Como el LC-104-PIMW-W combina tecnología de detección PIR y microondas, una alarma sólo se origina cuando los dos mecanismos de detección se activan al mismo tiempo. El rango efectivo del detector está limitada a la zona donde la cobertura PIR y microondas se cruzan. Tiene sensibilidad ajustable de detección para ambos mecanismos de detección.

    GSM Alarm burglar system

    EPIR
    €171,00 sin IVA
    EPIR is a security alarm system that works with GSM network.

    IP Communication Module

    PowerLink2
    €208,00 sin IVA
    Advanced Internet-based Home Control Solution for PowerMaxPro

    Visonic’s PowerLink is the most comprehensive Internet-based solution for advanced home security and control. It enables alarm central stations, security service providers and homeowners to leverage the full power of Internet connectivity to take their home security, safety and automation to the next level.

    At the most basic, PowerLink offers a plug and play broadband IP event notification solution. And, with connection to up to 14 cameras placed around the premises, PowerLink can expand to an IP-based video alarm verification solution offering smart recording and fast forwarding of events to the alarm central station.

    IP-based Event Notifications

    With more and more homeowners moving to VoIP communications, leaving behind PSTN lines, broadband becomes an ideal method for cost-free alarm event notifications delivery to central stations. Visonic's PowerLink Internet-based home control and surveillance system features built-in IP-based event notification capabilities. By simply plugging the PowerLink system into a free port on the home router, the alarm system is connected to the IP receiver at the central station – with no need to configure the system or the router. This provides a true plug and play experience for both the security installer and alarm central station. In addition, PowerLink provides a rapid supervision mechanism, enabling the central station to enjoy commercial-grade line supervision to all connected home security systems at zero cost.

    Utilizing PowerLink as an IP-based event notification solution requires that Visonic's IPMP (IP Management Platform) be implemented as an IP receiver at the central station.

    Image Alarm Verification the Right Way

    As PowerLink is fully integrated with the PowerMax® home security system, it has the ability to send alarm time images based on real motion detection, which significantly reduces the cost to service providers and hassle to homeowners of false alarms.

    The system enables central stations to receive image alarm verification information within seconds of the alarm time compared to the several minutes it takes with GPRS or PSTN-based alarm verification solutions. Moreover, alarm time images can be forwarded to the homeowner's email or mobile phone for immediate view and verification. By the time the security service provider calls, the homeowner already knows if the person that activated the alarm is authorized to be there or is an intruder. This means that the police or a central station guard is sent to the premises only when truly necessary.

    Enhanced Consumer Web Services

    PowerLink is not only a broadband event notification solution but a full-grade service platform that enables service providers to offer enhanced, web-based security and surveillance services to their customers. Homeowners can login to the secure PowerLink web portal, accessible from all standard PC and mobile phone browsers, and via an easy-to-use interface control their home security system, view its status, control X-10 compliant home devices and view live and alarm time recorded video from wireless and wired IP cameras. In addition, homeowners can set up the system to notify them by email or mobile phone text message whenever security, home devices or camera events occur.

    Total Control PowerLink is offered with the Visonic IPMP - IP Management Platform. The IPMP serves as an IP receiver in alarm central stations as well as a full grade service platform for consumer web services. By implementing the IPMP, service providers gain full control over the PowerLink service, including account and service management, billing, messaging, and much more.

    OASiS Control Panel with RF and GSM communications module

    JA-82KRG
    €498,60 sin IVA
    The JA-82KRG is a configuration of the JA-82K control panel with the JA-82R 868MHz RF communications module and the JA-80Y GSM comunicator.
    The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.

    outdoor wireless PIR detector (dual zone)

    JA-88P
    €304,22 sin IVA
    The JA-88P wireless PIR detector is designed to indicate disturbance outside the building caused by human bodies. It is a two-zone outdoor detector by Optex supplemented with a transmitter compatible with JA-80 OASiS systems. Both the detector and the transmitter are powered by three lithium batteries. Both devices have a common power supply and the low battery signal is transmitted to an ESS control panel as a standard. The detector is equipped with two TAMPER contacts (front and rear), which immediately report opening of the detector cover or its possible tearing from the place of installation. The detector regularly performs automatic tests and reports its status via control transmissions to the system.

    RFID Proximity Card

    PC-01
    €1,07 sin IVA
    The PC-01 access card is a proximity card (RFID standard EM UNIQUE 125kHz). Up to 50 cards can be used in the system. For higher security each card can be combined with a digital code (PIN). It is possible to print your artwork on the card (using some computer printers).

    Wireless dual-zone PIR motion detector

    JA-86P
    €90,00 sin IVA
    The JA-86P is a component of Jablotron’s Oasis 80 alarm system. It is designed to detect human body movement inside buildings. Detection in two zones makes this detector more immune to moving pets. The battery-powered detector communicates via OASIS radio protocol.

    Wireless Metane (natural gas) detector

    MCT-441 (868)
    €96,75 sin IVA
    The MCT-441 are fully supervised indoor, easy-to-install, PowerCode Gas detectors. The MCT-441 is a natural gas detector designed to send an alarm when Methane gas is detected. The detectors can be used in a house, apartment, caravan, mobile home or yacht.
    The detectors are powered by 220 VAC. An internal Lithium battery is used for AC power failure reporting only (the battery does not power the detector).
    The detector can send the following messages to the alarm system control panel: Gas alarm, gas sensor failure , AC power failure and low battery voltage.
    The MCT-441 is designed for wall mounting and should be placed in a location where gas presence, for example leakage, is probable.
    Upon gas detection, an audible buzzer is sounded and the built-in transmitter transmits a digital message, composed of the detector's PowerCode ID followed by status messages. Alarm and other data are thus forwarded to the alarm system. A periodic supervision message is transmitted automatically (see specifications) to inform the alarm system at regular intervals, of the unit’s active participation in the system.
    The MCT-441 has a 24-bit ID code, randomly selected in the factory from over 16 million possible combinations. This code is therefore unique and virtually impossible to reproduce. Compatible PowerCode receivers are designed to "learn" specific IDs and respond only to them.

    AJAX ReX - Range extender

    AJAX REX
    Desde €76,59 sin IVA
    AJAX ReX es un extensor de rango que amplifica la señal inalámbrica del joyero procedente del concentrador AJAX. Por defecto, el AJAX Hub tiene una distancia máxima transferible de 2000 metros, y con este ReX extiendes la señal inalámbrica en otros 1800 metros. Quedará claro que debido a la enorme distancia que ya se logra desde el Hub, este Rex solo está destinado a viviendas con parcelas muy grandes, o fábricas.

    AJAX ReX2 - Range extender

    REX2
    €131,41 sin IVA
    Repetidor de señal de radio que admite la verificación fotográfica de alarmas

    Más aplicaciones de un sistema de seguridad
    Los repetidores amplían los límites del área protegida y dan aún más libertad para colocar dispositivos del sistema de seguridad. Al conectar todos los dispositivos 1 o algunos de ellos a ReX 2, garantizará la seguridad y la automatización de un centro de negocios, de una propiedad, de un complejo de almacenes o una gran fábrica.

    5 repetidores pueden funcionar en el sistema Ajax para ampliar la cobertura de la red de radio hasta 35 km2 2. Los eventos y las alarmas se transmiten al instante, y la primera instantánea de verificación fotográfica se envía a una central receptora de alarmas y a los usuarios en tan solo 13 segundos*.

    LARGO detector P.I.R.

    JS-20
    €18,20 sin IVA

    Este detector de movimiento P.I.R. se utiliza para proteger interiores. Detecta cualquier movimiento de objetos con una temperatura próxima a la del cuerpo humano.

    Disponibilidad: 4 en stock

    Module of 8 Inputs

    JA-65H
    €21,90 sin IVA
    Module of 8 wired inputs for JA-65K control panels.

    OASiS Control Panel with RF and PSTN communications module

    JA-82KRX
    €212,60 sin IVA
    The JA-82KRX is a configuration of the JA-82K control panel with the JA-82R 868MHz RF communications module and the JA-80X PSTN comunicator.
    The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.

    Outputs extension for MCR-308 receiver

    MCX-8
    €41,25 sin IVA
    Adds 8 outputs to the MCR-308 receiver. Up to 3 units can be added to each.

    RFID Tag

    PC-02
    €1,07 sin IVA
    The PC-02 is the key tag version of the PC-01 card.

    Supervised Wireless PowerCode™ Flood Detector

    MCT-550 (868)
    €59,75 sin IVA
    The MCT-550 is a fully supervised wireless flood detector compatible with PowerMax™ and other Visonic PowerCode™ wireless systems. It is designed to detect the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods.
    In default mode, the MCT-550 transmits each flood alert message a single time. However, users may program the detector to repeat the alert every three minutes until the device is reset.

    Wireless Gas Leak Detector

    JA-80G
    €85,50 sin IVA
    The JA-80G detects mixtures of air and combustible gases or fumes (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration, responding with two different reactions. The mains-powered detector indicates a gas leakage optically, and acoustically, and transmits alarm wirelessly via Oasis protocol.

    8-Output Wireless PowerCode Receiver

    MCR-308
    €77,25 sin IVA
    MCR-308 is a superheterodyne receiver designed to convert a standard hard-wired control panel into a reliable fully supervised wireless system. It provides a cost-effective opportunity to realize all the benefits of Visonic wireless systems and devices.

    MCR-308 is compatible with all Visonic PowerCode™ and CodeSecure™ devices – including hand-held and portable units, window/door transmitters and a variety of detectors and other devices. The MCR-308 has 4 zones, each accommodating up to 4 transmitter devices. It is easily expanded using up to three MCX-8 zone expanders, for a total of 28 zones and 112 wireless devices in a single system. Dry contact outputs can be provided, using the RL-8 relay module that converts 8 open collector outputs to dry contact outputs.

    MCR-308 is designed for wireless alarm, emergency and arm/disarm applications as well as for remote control applications. It is easy to install and program utilizing a unique "Easy Learn" technique for transmitter enrolment. It provides all the features that professionals require, including four additional outputs for low battery reporting, tamper protection, RF signal jamming and transmitter inactivity indication.

    When used with CodeSecure devices, the MCR-308 implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.

    This highly reliable and versatile receiver is available in several optional frequencies in compliance with European, U.S. and other international standards, and is approved for use by local authorities in most countries.

    COMBO P.I.R. & rotura de cristal

    JS-25
    €25,10 sin IVA

    El JS-25 COMBO es un excelente "dos en uno" detector, lo que simplifica enormemente la instalación de alarma. Este detector combina dos sensores (PIR movimiento y rotura de cristal acústico) en una sola carcasa.

    Hard-wired keypad

    JA-81E
    €92,10 sin IVA
    The JA-81E is a component of Jablotron’s OASiS alarm system and is designed to control and program the system. It has a built-in proximity access card reader and allows the wiring up of a separate door detector. The keypad should be wired to the control panel.

    Lan Communicator

    JA-60WEB
    €184,50 sin IVA
    The JA-60WEB communicator is designed for JA-63 and JA-65 alarm control panels. The dialer is used for communication with a central monitoring station via an Ethernet network / the internet.

    OASiS Control Panel with RF communications and wired inputs module

    JA-82KRC
    €203,30 sin IVA
    The JA-82KRC is a configuration of the JA-82K control panel that includes the JA-82R wireless communications module and the JA-82C wired inputs module. The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.

    Outdoor Wireless Octa-QUAD™ Mirror Detector with Anti-Mask

    Tower-20AM MCW
    €243,00 sin IVA
    TOWER®-20AM MCW is a ground-breaking anti-masking wireless mirror detector that provides unparalleled alarm detection in outdoor environments due to the unique patented technologies it employs. It is the first detector to prevent false alarms caused by outdoor interferences, such as rain, snow, lightning storms, swaying bushes, and free-roaming animals, while still providing reliable detection of real threats.
    TOWER-20AM MCW features the revolutionary Octa-Quad™ technology, which uses eight PIR sensors (compared to only one used in other outdoor detectors), with each sensor acting as a Quad detector, to accurately determine whether an alarm is justified. In addition, further increasing its reliability, TOWER-20AM MCW also has a robust housing and patented anti-masking protection that can distinguish between masking spray, rain and sprinkler irrigation to provide exceptionally high resistance to vandalism and masking.

    Cable USB 2.0 A/A

    SB1000
    €4,95 sin IVA
    Cable USB com 1,6m, se utiliza para conectar el PC al iConnect, para programación.

    Wireless magnetic door detector

    JA-83M
    €61,80 sin IVA
    The JA-83M is a component of Jablotron’s Oasis alarm system. It is designed to detect the opening of doors, windows etc. The battery-powered detector communicates via OASiS radio protocol.

    Wireless Relay Output Module

    UC-82
    €67,00 sin IVA
    The UC-82 is powered by an external 12V DC power supply and it provides 2 relays which can be controlled by radio signals and offers the following:
    • Remotely controllable relay outputs which follow JA-80 control panel programmable PG outputs;
    • Remote control of appliances using RC-8x controllers;
    • Relay output of JA-8x wireless detectors;

    Advanced PowerCode Wireless Repeater

    MCX-610
    €119,25 sin IVA
    MCX-610 extends the communication range between the PowerMax® systems and other PowerCode™ transmitter, including one-way and two-way keyfobs*, remote commander and PowerCode motion detectors. It receives alarm, status and control messages from the wireless devices, and sends these messages to the control panel.

    For maximum security, the MCX-610 repeater uses a unique, factory programmed, randomly selected 24-bit digital alarm ID code during each transmission. This code is selected from 16 million possible code combinations and is therefore unique and virtually impossible to accidentally reproduce.

    Other important benefits of the MCX-610 include the unique anti-collision transmission sequence, which ensures accurate reception of simultaneous signals from multiple transmitters. The fully supervised repeater issues a test report on an hourly basis, indicating faults such as power failure, low battery charge and tampering.

    Detector PIR de doble tecnología digital

    Next Duo
    €36,00 sin IVA

    The Next Duo es un Detector de doble tecnología digital diseñado para evitar falsas alarmas debidas a interferencias en ambientes residenciales y comerciales. Un sensor pasivo de infrarrojos (PIR) y un sensor de microondas activo complementarios se combinan en una sola unidad, dando Next Duo una capacidad sin precedentes para distinguir entre el movimiento de un cuerpo humano y cualquier otra perturbación.

    OASiS Control Panel with RF communications module

    JA-82KR
    €154,00 sin IVA
    The JA-82KR is a configuration of the JA-82K control panel with the JA-82R wireless communications module. The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.

    Wireless keypad

    JA-81F
    €121,90 sin IVA
    The JA-81F is a component of Jablotron’s OASiS alarm system and is designed tocontrol and program the system. It has a built-in proximity access card reader andallows the wiring up of a separate door detector. The battery-powered keypad communicates wirelessly using OASiS protocol.

    Wireless magnetic door detector & universal transmitter

    JA-81M
    €55,90 sin IVA
    The JA-81M is a component of Jablotron’s Oasis 80 alarm system. It is designed to detect the opening of doors, windows etc. It can also be extended by a normally closed / normally open sensor.
    It is also designed to detect the handling of roller blinds. This is achieved by detecting ratchet-wheel movements. Small movements are filtered out so that wind blasts do not cause false alarms.
    The battery-powered detector communicates via OASIS radio protocol.

    Wireless PowerCode Digital Mirror PIR Detector

    Tower-40 MCW
    €60,75 sin IVA
    The TOWER 40 is a microprocessor-controlled wireless digital PIR detector, designed for easy installation, free of vertical adjustment. It features parabolic and cylindrical mirrors with uniform detection sensitivity throughout its operating range, up to 18 meters (59 ft), with creep zone protection.
    The advanced True Motion Recognition™ algorithm (patented) allows the TOWER 40 to distinguish between true motion of an intruder and any other disturbances which may cause false alarms.
    An on-board motion event jumper determines whether 1 or 2 consecutive motion events trigger an alarm.

    Single-Output Wireless PowerCode™ Receiver

    MCR-304 (868)
    €72,75 sin IVA
    The MCR-304 superheterodyne receiver is designed for easy and cost-effective upgrading, enabling hard-wired control panels to operate with wireless remote devices. Compatible with all Visonic PowerCode™ and CodeSecure™ devices, the MCR-304 receiver supports up to 10 wireless devices – including hand-held and portable units, window/door transmitters and a variety of detectors and other devices. The MCR-304 is designed for wireless alarm, emergency and arm/disarm applications as well as for remote control systems and gate openers for garage and parking lots. It is easy to install and program utilizing a unique "Easy Learn" technique for transmitter enrolment. It provides all the features professionals require, including low battery reporting, tamper protection, RF signal jamming and transmitter inactivity output indication. When used with CodeSecure™ devices, the MCR-304 implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.

    Wired keypad with RGB LCD

    JA-81E RGB
    €108,40 sin IVA
    The JA-81E is a component of Jablotron’s OASiS alarm system and is designed to control and program the system. It has a built-in proximity access card reader and allows the wiring up of a separate door detector. The keypad should be wired to the control panel.

    Wireless Interface

    UC-280
    €123,70 sin IVA
    The UC-280 is an 8-zone interface linking JA-60 wireless detectors with hard-wired security control panels.

    Wireless magnetic door-detector

    JA-82M
    €64,50 sin IVA
    The JA-82M designed to detect opening windows, doors etc.

    Wireless Temperature Detector

    MCT-560
    €51,75 sin IVA
    The MCT-560 is a fully supervised wireless PowerCode detector used with the PowerMax Pro (Ver. 5). The detector alerts the alarm system control panel upon detecting critical indoor or outdoor temperatures. The detector generates an alarm message when its sensor detects that the temperature has reached a certain temperature point. A restore message is generated when it crosses back the threshold temperature point. There are a total of four fixed temperature points and the user can enable one or more temperature point.
    The MCT-560 can be used in instances where temperature detection is critical. Other examples of detector usage are as follows:
    • Activating and deactivating pipe heaters at locations where low temperatures may causes the water in pipes to freeze.
    • Warn of possible electrical device malfunction due to high or low temperature levels.
    • Alerting elderly people of a significant rise or drop in room temperature.
    The MCT-560 detects both indoor and outdoor temperatures. The detector monitors room temperature using an internal sensor. For outdoor or refrigerator installations, a waterproof temperature probe (optional) is used.
    When the probe is connected, the temperature measurement is performed only by the probe sensor. When the probe is not connected, the temperature measurement is performed only by the detector's internal sensor.
    Once the predefined temperature is reached, the detector wirelessly updates the alarm system control panel which then sends a notification to the central station or uses the PGM/X-10 controls to switch on a connected appliance, for example, a heater or air conditioner.

    Backup battrery for the Powermax Pro security console

    BATPWMPRO
    €39,00 sin IVA
    Replacement NiMH battery pack for the Visonic Powermax Pro security console.

    RGB wireless keypad

    JA-81F RGB
    €148,90 sin IVA
    The JA-81F is a component of Jablotron’s OASiS alarm system and is designed to control and program the system. The display backlight colour can be set according to your needs.
    It has a built-in proximity access card reader and allows the wiring up of a separate door detector. The battery-powered keypad communicates wirelessly using OASiS protocol.

    Wireless motion detector with built-in camera

    JA-84P
    €168,55 sin IVA
    The JA-84P provides human body movement detection including visual alarm verification.

    Backup battery wireless sirens

    SA-206/1.3
    €5,70 sin IVA
    Maintenance-free rechargeable lead-calcium batteries with 6V voltage and 1,3Ah capacity. This type of battery has a long lifetime and do not need any other care other than charging.

    Flexible External Antenna

    AN-01
    €15,10 sin IVA
    External antenna for the wireless equipment series Jablotron JA-60.

    Batería NiMH de repuesto para la consola iConnect.

    1BT3025
    €39,35 sin IVA
    Batería NiMH de repuesto para la consola de seguridad iConnect.

    Wireless Motion/Glass-break Detector

    JA-80PB
    €119,00 sin IVA
    The JA-80PB consists of two independent detectors which occupy two separate enrollment addresses in the control panel. The motion detector uses a PIR sensor. The glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass breaking. The product is designed for internal use in buildings. The battery-powered detector communicates via OASIS radio protocol.

    PICCOLO SMS Terminal

    MT-77
    €18,70 sin IVA
    The MT-77 Piccolo terminal is a communication accessory for Jablotron home system. It should be connected to JA-6x control panel equipped with GSM communicator.

    VIVO detector de rotura de cristal

    GBS-210
    €19,30 sin IVA

    El GBS-210 detector de rotura de cristal detecta la rotura de ventanas de vidrio.

    Wireless outdoor PIR detector

    JA-89P
    €354,00 sin IVA
    The JA-89P is an outdoor intruder detector designed to detect human body movement in a protected area. It supplements a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the sensor to be used within JA-80 OASiS systems.

    Lithium battery for MCS-710/30

    BAT_MCS-710
    €31,87 sin IVA
    Lithium Battery for Visonic MCS-710 and MCS-730 wireless sirens.

    Sensor magnético de puerta/ventanas

    SA-200
    €2,50 sin IVA

    Sensor magnético de puerta/ventanas

    Wireless PIR Motion Detector

    JA-80P
    €67,80 sin IVA
    The JA-80P is designed to detect human body movement inside buildings. The detection pattern can be modified by optional lenses. Detector immunity has two selectable levels. The battery-powered detector communicates via OASIS radio protocol.

    Mini sensor magnético de puerta/ventanas

    SA-201
    €4,30 sin IVA

    Sensor magnético de puerta/ventanas de dimensiones reducidas.

    Wireless PIR motion detector

    JA-83P
    €68,60 sin IVA
    This new compact PIR detector is available giving great performance and less visual impact. It works with Jablotron’s OASiS alarm system. It is designed to detect human body movement over 112 m ² of floor space inside buildings.
    The detection pattern can be modified by optional lenses to be pet-immune. Detector immunity has two selectable levels. The detector communicates via OASIS radio protocol runs on battery power.

    Externatl GSM antenna

    AN-05
    €24,10 sin IVA
    37cm antenna with magnetic base for Jablotron JA-60GSM dialer.

    Detector de fugas de gas (12VDC)

    GS-133
    €50,00 sin IVA

    El GS-133 detecta todas las mezclas de aire y gas combustible (gas natural, metano, propano, butano, acetileno, GPL, etc.) El detector detecta dos niveles de concentración de gas - con las reacciones de salida correspondientes.

    Las principales características del GS-133 son: alta fiabilidad y sensibilidad, tamaño compacto, estabilidad y larga vida.

    Wireless shock and tilt detector

    JA-82SH
    €69,90 sin IVA
    Detects shock and tilt on doors, windows etc. caused by an intruders attempts to force, smash, drill, or saw through. Has easy installation and uses digital signal processing. Features a memory of previous shocks.
    The detector is a component of the JABLOTRON ALARMS Oasis security system. It has two selectable operation modes. The mode for the detection of shocks / vibrations of doors, windows, etc. can be used to indicate attempts to breach these by force.
    The tilt detection mode can be used to indicate unwanted tampering with the object to which the detector is firmly fixed. This may be used for safes, artworks etc.
    The detector uses a semiconductor tri-axial accelerometer with digital output. Its signal processing guarantees a high immunity against false alarms.
    The detector communicates wirelessly using Oasis protocol and it is battery powered.

    Detector P.I.R. de doble zona

    JS-22
    €39,10 sin IVA

    El detector está diseñado para detectar el movimiento del cuerpo humano en los edificios. El uso de dos sensores garantiza una mejor inmunidad contra activación por movimiento de animales domésticos.

    La señal es procesada por un método de análisis de la señal múltiple que garantiza una excelente sensibilidad y una alta resistencia a las falsas alarmas. La análisis de detección se puede ajustar para aumentar su inmunidad (si está instalado en un lugar problemático).

    El detector se distingue por su excelente inmunidad contra la interferencia de alta frecuencia y otras señales falsas.

    Se puede instalar en una pared plana o en una esquina.

    External Antenna

    AN-03
    €88,90 sin IVA
    External antenna for the wireless equipment series Jablotron JA-60.

    Pintura gris para el sistema de control de iConnect

    ICSILVER
    €30,00 sin IVA
    Espalda y caja frontal ABS en color gris. Delantero y trasero acabado en acrílico negro brillante. Este servicio es para el sistema de control iConnect que adquirió.

    Detector de inundaciones

    LD-12
    €24,30 sin IVA

    El detector funciona como un indicador de una habitación siendo inundada con agua (por ejemplo, sótanos, cuartos de baño). Esta información se envía a un sistema de alarma para enviar un mensaje de alerta.

    Es posible conectar el detector de LD-12 en los terminales de entrada de los sistemas de alarma.

    Detetor magnético NF para portões

    RS-06W
    €27,70 sin IVA
    CARACTERÍSTICAS: - Folga do íman de 50mm - Suporte em alumínio ajustável - Material: a. Encapsulamento dos contactos em Zinco fundido b. Encapsulamento do íman em ABS c. Suporte em L, em liga de alumínio - Cabo blindado com comprimentos ed 61 cm - Interruptor reed e íman de grande qualidade - Cor cinza

    Rechargeable 12V/2,2Ah Battery

    SA-214/2.2
    €10,30 sin IVA
    Maintenance-free rechargeable lead-calcium batteries with 12V voltage and 2,2Ah capacity. This type of battery has a long lifetime and do not need any other care other than charging.

    12V Backup battery for the JA-63K

    SA-214/1.3
    €7,90 sin IVA
    Backup battery for the JA63Kxx security systems.

    Curtain lens

    JS-7902
    €2,16 sin IVA
    Curtain lens for Jablotron's motion detectors. Compatible with JS-10, JS-20, JS-25, JA-60P, JA-80P, JA-80PB, JA-84P e JA-83P.

    Wireless Wall Button

    RC-89
    €28,90 sin IVA
    The RC-89 is a component of Jablotron’s Oasis 80 alarm system. It can be used as a wireless doorbell button or to trigger a panic alarm or to operate various electrical appliances. The battery-powered button communicates via OASIS radio protocol.

    Security

    Close
    Filter by Clear All
    Min: €1,00 Max: €806,00
    1 806