Detector de movimiento inalámbrico con sensor de microondas que notifica al propietario los primeros signos de intrusión en el hogar o la oficina. Diseñado para habitaciones con aire acondicionado, chimeneas y donde existe la posibilidad de que la luz parpadee, reflejos y reflejos.
Detector inalámbrico de movimiento y rotura de cristales. El dispositivo ayuda a proteger la habitación de los intrusos que ingresan a través de puertas y ventanas, y controla el estado actual del vidrio.
Detector inalámbrico de apertura que notifica los primeros signos de intrusión en la habitación a través de una puerta o ventana rota. Puede montarse en todo tipo de puertas, incluida una base metálica.
El detector de apertura inalámbrico notifica los primeros signos de intrusión en la habitación a través de la puerta o ventana. Se instala incluso en las ventanas del techo que se pueden dejar abiertas al salir de la casa.
Detector de movimiento de cortina bidireccional e inalámbrico para exteriores Protección ante intentos de acercamiento a las instalaciones
DualCurtain Outdoor controla el perímetro sin crear obstáculos para las personas que ya están dentro. Dos sistemas ópticos independientes con sectores de visualización estrechos y una configuración flexible le permiten ajustar con precisión 30 metros de detección, excluyendo posibles fuentes de falsas alarmas. El exclusivo software ELSA responde a los intrusos, descartando activaciones por interferencias naturales y mascotas.
AJAX MotionProtect Outdoor detecta personas antes de que ingresen a su hogar. Con un alcance de hasta 15 metros en un ángulo de 90 grados y una sensibilidad ajustable en 3 posiciones, este detector es perfecto para uso en exteriores. Los perros y gatos pueden andar sueltos por el jardín y solo se detectará a las personas que no tengan nada que buscar. Este detector se puede montar en cualquier lugar del jardín o en el camino de entrada gracias a su alcance inalámbrico de 1800 metros desde el Hub.
Pequeño detector inalámbrico que detecta rotura de cristales a una distancia de hasta 9 metros. Si alguien intenta entrar al recinto rompiendo una ventana, el sistema notificará inmediatamente a los usuarios y a la empresa de seguridad. Al mismo tiempo, los coches que pasan o los perros que ladran no provocarán falsas alarmas.
Detector de incendios inalámbrico con sensores de temperatura y de monóxido de carbono que monitoriza la seguridad de la habitación las veinticuatro horas del día y alerta de inmediato la presencia de niveles peligrosos de monóxido de carbono, humo o aumentos bruscos en la temperatura.
Teclado táctil inalámbrico compatible con tarjetas y mandos contactless Control táctil sin comprometer la fiabilidad KeyPad Plus es una combinación de diseño, tecnología de encriptación avanzada y una experiencia de usuario diseñada para la administración de seguridad más simple y segura. Arme y desarme Ajax, habilite el modo nocturno y administre grupos específicos con una tarjeta Pass o un comando Tag(1).
Wireless module for connection of outdoor motion detectors, IR barriers, liquid level detectors, and gas detectors, thermal relays and any third-party devices with wired output to the Ajax security system.
The AZ-10M is designed to indicate an intrusion by sensing the opening of doors or windows . The magnetic contact detector responds to the removal of the door- or window-mounted permanent magnet from the main unit. Manually tampering with the detector, or any attempt to remove it from the window or door frame leads to the transmission of a tamper signal. The detector performs regular auto-testing and regularly reports its condition to the system.
The JA-87P wireless outdoor detector with curtain lens characteristics is designed to indicate disturbances outside the building caused by human bodies. It is a dual zone outdoor detector by Optex with a 5° angular width detection zone which makes it very suitable for guarding narrow spaces such as balconies, French doors, terraces, etc. It is supplemented with a transmitter compatible with JA-8x OASiS systems. Both the detector and the transmitter are powered by a lithium battery. The common power supply is beneficial as the low battery signal is transmitted to a control panel as standard. The detector is equipped with three TAMPER contacts (at the front on the detection part and the front and rear on the transmission part), which immediately report opening of the detector cover or its tearing from the place of installation. The detector can also have the anti-masking function activated. The detector reports its current status via control transmissions to the system.
ET08 provides a "dial tone" and fully replaces a telephone landline for Alarm Control Panel reporting to the central monitoring station when telephone line is unavailable or has been cut or disconnected by PSTN provider. Can detect temporary service suspension by the service provider for technical or billing reasons even if a "dial tone" is still present. (optional extra)
The motion detector operates very simply: it responds to human movements within protected area and informs the owner about this by calling mobile phone and sending SMS. From the technical viewpoint, this facility is an infrared volume announcer combined with GSM-communicator, built-in radio module allows to operate with remote controllers (turn on/off the protection mode). A number of patented knowledge, protected by the law of copyright, was employed at motion detector "EXPRESS GSM". GSM motion detector is supplied with power by Li-battery CR123 (3V). The manufacturer guarantees not less than 6 months of continuous operating with the same battery. Advanced options For those who want to make customs settings, there is such a possibility. There are many options to set up:
additional phone numbers for warning (up to 6 numbers);
additional remote controllers (up to 6 pieces) ;
warning method: call+SMS or only SMS. The first method is preferred as it is less probable to miss incoming call than SMS;
frequency of test messages and messages of balance. motion detector sends test messages to owner’s mobile phone with some frequency. They contain the information about signal strength and temperature of GSM-module, SIM-card balance. On default messages are sent once a week. It is possible to set up how often the messages of balance will be sent (along with every standard test message, along with every second, third, tenth etc. test message);
temporary delay of turning on the protection mode, of warning call;
time for automatic returning to protection mode after alarm. In case of false alarm motion detector will continue to protect the object and will not disturb the owner. In case of real entry, alarm messages will be sending continuously if trespasser hasn’t left;
The WJ-80 is designed to connect JA-80H outdoor keypads or JA-80N RFID readers to a control panel. It provides an output to operate the electric strike of a door lock and is equipped with a wireless door bell transmitter. The WJ-80 can also be used to interface to a third party keypad (reader) which uses Wiegand 26b protocol (e.g. HID RK-40 a RK-10).
Módulo inalámbrico para la conexión de detectores de movimiento al aire libre, barreras IR, detectores de nivel de líquido y detectores de gas, relés térmicos y dispositivos de terceros con salida cableada al sistema de seguridad Ajax.
The Next+ PIR MCW PowerCode™ wireless digital PIR detector represents the next generation of digital wireless detectors. A fully supervised wireless detector with anti-collision PowerCode™ technology, Next+ PIR MCW is compatible with all PowerMax™ and all Visonic PowerCode™ wireless panels and receivers. Next+ PIR MCW implements industry-leading patented technologies including FM Digital Signal Processing (FM-DSP), "True Motion Recognition"™ with Fuzzy Logic algorithm (TMR™), and state of the art 3D cylindrical optics. The result is the industry's best detection accuracy, false alarm immunity and ultimate long term reliability – in an attractive, easily installed wireless detector designed for any home or office environment.
The PowerMax Pro is a user and installer-friendly, 30-zone fully-supervised wireless control system. The system is designed to function in a way that appeals to the user but also offers features that make installers’ life easier than ever before. The PowerMax Pro includes an optional partition feature. Partitioning allows you to have up to four independently controllable areas with different user codes assigned to each partition. A partition can be armed or disarmed regardless of the status of the other partitions within the system.
Siren kit external, wired to the security console SC-28 Homeprotector. When the control panel SC-28 is triggered, sends a set of X10 signals to the grid that can be used to activate the lighting of your home or signaling systems such as sirens or fireflies.
The MCS-730 two-way, self-powered fully wireless outdoor siren (IP55) provides the perfect security solution for home owners looking for an external siren that is both affordable and easy to install. It excels in offering cabling-free installation and optional extended time between battery changes. The siren's two-way, fully supervised communication with the control panel and two diversity antennas assure highly reliable operation and optimal wireless performance, including visual and audial notifications of intrusions, fire alarms, low battery voltage, and communication disruptions. In addition, the siren provides auditory squawk notifications of arming and disarming the security system. In the event of an alarm, the siren sound is extremely loud, ensuring the alarm is noticed. The sleek design ensures the MCS-730 siren is clearly visible from almost every angle. This makes it highly effective at alerting and deterring potential intruders, while maintaining the clean external look of any building.
ESIM251 is a microcontroller based device used to inform users about the alarm in automatic or security systems and control one electric appliance -relay.
Alarm and control system ESIM251 works over GSM network.
It works 24/7, it always reacts to the incoming signal.
ESIM251 can control 1 electronic appliance (a relay) sending a password and a special command from a GSM phone of any of the users. You can, for example, turn on the heating, lighting, lift the gates, blinds etc.
The system will ignore requests coming from unknown telephone number or SMS message with wrong password.
Indoor wireless sirens EWS1 is a wireless device with integrated siren speakers which are used for operating ELDES wireless security systems. Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software "ELDES Configuration Tool“). Connected devices are recognized as central security system devices and can be controlled via system phone number. The system adds one wireless zone and one wireless output. Wireless zone is used to monitor device and wireless output is used to control the speaker. When the system is violated, the siren alarms for one minute. It is possible to connect up to 16 wireless devices to the central security system at a time.
The JA-80IR is designed to detect the interruption of infra-red beams by intruders walking between IR transmitters and receivers. The unit comprises an Optex sensor and a Jablotron transmitter and is powered by 4 lithium batteries. Tampering is also signalled to the control panel in addition to beam blocking and the results of regular self-testing.
The AZ-10P is designed to detect human movement in a protected area . The detector is particularly suited to rooms with multiple entrances. Signals are transmitted using secure protocol radio signals. Any tampering with the product or attempt to remove it results in sending a tamper signal. The detector performs regular auto-testing and reports its conditions regularly to the system
The JA-80H was designed to control access (door lock) or to control a security system and connects to the Oasis control panel via a WJ-80 interface. Alternatively it can be connected to an AS-80 unit as a part of a stand-alone access system. The keypad and card reader sends data in Wiegand 26b format.
The Remote Chime is designed to work with the X10 Security Console or Home Controller to provide a pleasant annunciator chime when someone approaches. It will also respond as Siren in case the Security Console is activated. It can also be activated using the correct House Code and Unit Code from any X10 controller.
The AZ-10T RFID tag is used to identify and authenticate users. To authorize it is sufficient to apply the RFID tag to the AZ-10D RFID tag reader . The RFID tag can be attached comfortably onto a key ring. The AZ-10T is only compatible with the Azor system. It cannot be used for JA-8x Oasis RFID tag readers and Oasis RFID cards/tags cannot be used for Azor systems
The JA-68 is a universal output module designed for use within Jablotron systems of the JA-80 OASiS, JA-63 Profi and JA-65 Maestro series. The module provides eight factory reprogrammed semiconductor outputs and a switch-over relay output. The relay can be configured using 10 DIP switches which allows for multiple function assignment. There is no limit in the number of JA-68 modules used in the system. There is no limit to the number of JA-68 modules used in the system and the JA-68 module can be combined with GSM, LAN or PSTN (landline) communicators. The module is designed for being placed into the control panel housing.
The 8 pieces kit includes one Oasis security console with the RF communications module, the GSM communication module, one wireless keypad, one wired indoor siren, one mini remote, three wireless motion detector and one USB cable.
El controlador del canal de radio permite controlar los aparatos domésticos de forma remota. Se utiliza para encender / apagar planchas, puertas de garaje, calentadores de agua y pisos con aislamiento térmico.
This module is imbedded in a specially-enlarged replacement cover. Installation is performed by replacing the original cover, together with wiring the GD-04A module to the GD-04 circuit board via the corresponding connector. The backup battery requires approx. 72 hours to be fully charged. The battery provides approx. 12 to 24 hours of backup operation, depending on the output relay state and on the GSM signal strength (as with any GSM device, David’s consumption is higher in places with a low signal level as the transmitter power has to be increased).
Gracias a la tecnología patentada de análisis de EL Motion Vector, el Arrow XL opera con notable agilidad en una cortina de 9 metros a través de vitrinas, claraboyas, puertas correderas, entradas y pasillos del ático.
Arrow XL analiza pulsos de la señal, reconociendo su dirección y distinguir entre el movimiento permitido (enfoque desde el interior del perímetro protegido) y el movimiento sospechoso (enfoque desde fuera de la cortina).
Magnetic door contact with panic button EWD1 is a wireless device with magnetic contact which are used to secure doors, windows or any other opening parts and operating with ELDES wireless security systems. Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software „ELDES Configuration Tool“). When EWD1 is connected to the system, two wireless zones are added. First wireless zone is used to monitor the magnetic contacts and the second wireless zone is for managing the panic button. By default panic button zone is configured as Silent zone and in case of violation, system will cause an alarm to administrator numbers or/and to monitoring station without turning the siren on. It is possible to connect up to 16 wireless devices to the central security system at a time. Maximum distance for wireless connection is 150 meters (in open areas).
The RC-86 is designed to remotely control setting/unsetting, trigger panic alarms, and control other appliances. The big advantage is the possibility of configuring it to 433 MHz (JA-60 systems, UC-216, UC-222 receivers etc). The keyfob indicates its flat battery.
The JA-85B glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass breaking and it is designed for indoor use in buildings or in cars. The battery-powered detector communicates via OASIS radio protocol.
The Next+ K9-85 MCW is a PowerCode™ wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. Employing Visonic's patented "Target Specific Imaging" optical system (TSI™) and unique pet identification software algorithm, the Next+ K9-85 has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb).
The AZ-10S detector reacts to the presence of smoke (visible smoke) and also to exceeding a high temperature in the room caused by fire. It has a built-in siren. It contains two separate detectors - an optical smoke detector and a heat detector . The optical smoke detector operates on the principle of scattered light and is very sensitive to larger particles, which are dense but is less sensitive to small particles from burning liquids such as alcohol, and so has a built-in temperature sensor. The microprocessor performs advanced digital analysis to avoid false alarms.
PowerHorn is used as an additional audio alarm unit for use with the Home Security System which gives an additional independent 110 decibel sound output when the security system is triggered. The PowerHorn will only trip a few seconds later after the alarm trips. It counts the sequence transmitted to flash lights connected to Lamp Modules after the lights have flashed 4 or 5 times. This prevents it from being accidentally tripped from any other X10 controller. You can also trip the PowerHorn from any other X10 controller, which is useful in panic situations. It can be added anywhere around the home; nobody wants to hang around when one of these activate.
The MCT-211 is a PowerCode™ miniature waterproof wrist-worn transmitter, designed for personal emergency signaling and other applications where the transmitter needs to be within easy reach at all times. The transmitter is waterproof and suitable for wearing even in a shower or in other wet environments such as factories, hospitals, gardens, pools and rain conditions. Attractive ergonomic design makes the MCT-211 as convenient to wear on a regular basis as any wristwatch.
El relé es un relé inalámbrico de bajo voltaje. El relé se puede utilizar para encender / apagar de forma remota dispositivos alimentados por una fuente de 7-24 V CC. El dispositivo se comunica con el concentrador a través del protocolo de radio Jeweler.
Alarm and control system ESIM021 is used to inform a maximum of two users through the GSM network that an alarm has occurred. Users may also control one electrical device via their mobile phones, e.g. they may switch a lighting system on and off or open and close a gate.
ESIM021 may be connected to an intruder alarm control panel. It has two digital inputs (normally open), so that one detection device may be connected independently of the intruder alarm control panel, or alternatively two detection devices may be connected to ESIM021 without needing a control panel.
When a triggered zone is restored to pre-alarm, the system also sends an SMS or voice message confirming that this has been done.
Either user may turn the heating or lighting on or off, open gates, lift blinds etc. by sending ESIM021 a text message. Only one electrical device may be controlled in this way. The system remembers the status of output in the case of temporary electricity failures. The system will ignore requests and calls coming from unknown telephone numbers.
Esta sirena está diseñado para su uso exterior. Se alimenta a través del panel de control.
La sirena se comunica con el host a través del cable. Esta sirena tiene un alto poder de acústica y una luz intermitente. Además de las señales de advertencia, también es posible emitir "pitidos" en las acciones de armado y desarmado de la unidad del sistema.
Cuenta con un sensor de sabotaje incorporado, lo que provoca una alarma si hay un intento de abrir la sirena.
Outdoor wireless siren EWS2 is external power supplied siren with integrated wireless module EW1. This wireless module EW1 connects to ELDES wireless security systems and managing EWS2 siren to work with the system. Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software „ELDES Configuration Tool“) and configure input zones and outputs. Connected devices are recognized as central security system devices and can be controlled via system phone number. The siren has integrated battery and in case of power supply failure, it starts alarming. When the system is violated, the siren alarms for one minute. EW1 module also has one unused zone and one unused output. They can be used to connect variuos additional devices such as motion sensors, smoke detectors and etc (see wireless expansion module EW1 manual).
The MCT-241 is a PowerCodeTM miniature, microprocessorcontrolled personal UHF transmitter. It is designed to transmit coded alert signal in distress or in other emergency situations. The transmitter is waterproof and suitable for wearing in a shower. The transmitter is activated by depressing the recessed oval pushbutton at the center of the unit. A built-in timer determines the transmission time to 3 seconds, even if the user maintains the transmission button depressed shorter or longer than that. When triggered, the transmitter transmits a unique, factory programmed, randomly selected 24-bit digital alarm code. This code is selected from 16 million possible codes and is therefore unique and virtually impossible to reproduce. Operating power is obtained from an internal 3V Lithium battery. A red LED (see Fig. 1) lights steadily during the transmission, giving reassurance to the user and indicating that the battery condition is good. If the LED flashes each time the transmitter is activated, it indicates that the battery voltage is low and must be replaced as soon as possible. The transmitter case is sealed (no screws) to enable the waterproof feature. Therefore, battery replacement can only be done in the factory. If the transmitter is activated while the battery voltage is low, a ‘low battery’ alarm code is transmitted. If the transmitter is not activated for a long period, the battery is self-tested every 12 hours. After three consecutive “low battery” states, a supervisory ‘low battery’ alarm code is transmitted. The transmitter is supplied with two wearing accessories, a neck cord (to be worn around the neck) and a clip (to be attached to the user belt or shirt pocket). The neck cord includes a built-in safety release mechanism. This neck cord must never be replaced with a cord that does not include a safety release.
El SD-18 puede trabajar de forma autónoma como un indicador de fuego, lanzando un poderoso alertas mediante una alarma sonora (85 db). También puede trabajar en conjunto con la consola de seguridad HomeProtector+ (SC28) que ofrece la posibilidad de alertas remotas por teléfono e incluso la activación de varios elementos técnicos tales como válvulas o ventiladores.
Clip MCW is the industry's smallest and most elegant wireless curtain-type PIR detector designed for the protection of doors, windows and all-glass walls. This fully-supervised detector featuring anti-collision PowerCode™ technology is compatible with the PowerMax® wireless family and other Visonic PowerCode™ wireless receivers. Clip MCW creates a protective curtain enabling complete coverage for properties with large or subdivided windows, doors and all-glass walls. Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm. Clip MCW uses advanced patented digital FM signal processing, as well as the well-known patented TMR™ algorithm to enable three different detection modes (2m, 4m, 6m) in a single detector, each programmable for optimal performance with the unit's specific application. Advanced motion analysis enables Clip MCW to distinguish human motion from other disturbances for the most accurate detection and the fewest false alarms.
El Socket AJAX es un enchufe de alimentación inteligente para un control total de sus dispositivos. Regresará a casa para disfrutar de un clima confortable y un ambiente acogedor durante todo el año. Encienda sus aparatos de calefacción durante el invierno y el aire acondicionado durante el verano. Encienda su humidificador de aire y caliente el agua para su baño. Con solo unos pocos toques en la aplicación, en su camino a casa.
The JA-80BT Bluetooth adapter (interface) allows you to establish a wireless connection between systems of the JA-8x series or the JA-6x series and PCs equipped with Bluetooth connectivity. You can connect the adapter to the control panel’s digital bus connector via an RJ cable supplied with the package. The computer is assumed to have all the hardware/software installed necessary for Bluetooth communication.
The detector indicates fire hazards using the built-in LED indicator and alarm outputs ALARM and TAMPER. These outputs must be connected to control panels complying with EN 50131-3. The SD-282 ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light and is very sensitive to dust particles which are present in smoke. There is also a built-in heat detector for detecting fire which generates heat quickly with a small amount of smoke. The microprocessor performs digital analysis for a high false-alarm immunity.
The JA-65X digital communicator is designed for JA-63 and JA-65 alarm control panels. If the 65X module is installed, the control panel can communicate with a Monitoring Station, send voice messages, SMS messages and dial a numeric Pager as well as communicate with a remote PC. A standard analog telephone line (type TNV 1-3) must be connected to the module for these functions.
ESIM264 is an Alarm and Control System (GSM Caller) for the security of premises and control or management of electronic devices through GSM network. The basic advantage of the GSM system is the user’s ability to know immediately what’s happening at their home, apartment, warehouse, summer house or other premises even when the user himself is a long way away – in another city or even in another country. It also has a remote control switch to turn on or turn off 4 or more different devices just by sending SMS messages.
System can be armed and disarmed in one of three ways: via keypad EKB3, key iButton® or free-of-chage call from your phone;
ESIM264 supports the CONTACT ID protocol which is required to transmit signals to a Monitoring Station;
ELDES wireless devices can be added to the system using the EWT1 module. This increases the maximum number of Zones to 44 units and the maximum number of Outputs to 44 units;
Automatic Output control – the system may enable / disable individual Outputs automatically when a specified event occurs;
Fault reporting: The system automatically reports if any of the sensors or sirens disconnect from the system;
Battery check option - checks the health of the battery and reports when the battery needs to be replaced;
The JA-82KRC is a basic configuration of the JA-82K control panel. The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.
PIR sensor EWP1 is a wireless device with integrated motion detector for use as part of the ELDES wireless security system. The sensor allow expanding security zones administrated by the systems up to 16 additional zones and also the installation is comfortable and simple as it does not require any wired connections between the system devices. The user only needs to turn on the required number of PIR sensors EWP1 and connect them to the control panel, either by sending a command via SMS message or using the ELDES Configuration Tool software.
The MCT-302 is a fully supervised PowerCode™ magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.