Close
(0) artículos
No tiene articulos en su carrito de compras.
TODAS LAS CATEGORIAS
    Filters
    Preferencias
    Buscar
    Fabricante: X10

    Internal / External R.F. Motion Detector

    €36,78 IVA incluido
    Imagine you won't need to tell the kids any more to turn off the lights when they leave their bedroom. With the MS13E Occupancy Sensor, it will be done automatically. Imagine not having to search for a light switch in the dark. The MS13E will turn on the lights when you enter. And for the "sophisticated", with the CM15 Computer Interface you can set up macros to run when the MS13E senses "occupancy" or not. With the CM11E time-delay feature you could have sequenced lighting. So it's not only the garage or front door lights which you may wish to control by the MS13E Occupancy sensor. However, don't forget everytime a light or heater is switched off because nobody is in the room, you save money. The MS13E Motion Detector sends Wireless Radio Frequency (RF) signals to an X10 Transceiver (TM13E) or any X10 security system base receiver. The receiver then passes the signals onto your house wiring to turn on lights (or appliances) around your home. The MS13E will send a RF signal to turn off the light at the users pre-determined time. The user can set the MS13E to turn off at 1,2,4,8,16,32,64, 128 or 256 minimum later as long as no motion has been detected. Note that the MS13E has a built-in photocell that detects when it's dark. The user can select to use the photocell to only turn lights on when it's dark. In this condition the MS13E does not transmit its RF signal during daylight. Alternatively the user may choose not to use the photocell and the MS13E will transmit day and night that there is someone there. In addition, the MS13E sends signals when it detects dusk and dawn so it can turn a light on when it gets dark and turn it off when it gets light (in addition to turning lights on when it detects motion, when it's dark).
    SKU: MS13
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options



    Application: • Save energy by turning off lights and appliances
    when you are not in the room.
    • Lighting without wall switches.
    • Activate lighting sequences
    • Protect your home by early warning of unexpected visitorsTechInfo: • Batteries: 2 x 'AAA' cells
    • RF Frequency: 433.92 MHz
    • RF Frequency: 30m free air
    • Output: 1mW
    • PIR Range:12m at 0° ; - 5 m at 45 °
    • Approvals:
    • Radio: I-ETS 300220
    • EMC: EN300220
    • CE Mark
    • Ambient temperature:
    - 10°C to + 30° C (operation)
    - 20° C to + 70° C (storage)
    • Dimensions:
    67 x 67 x 27 mm
    (width x height x depth)







    Escriba su propia opinion
    • Solo los usuarios registrados pueden agregar sus comentarios
    *
    *
    • Malo
    • Excelente
    *
    *
    *
    *



    Application: • Save energy by turning off lights and appliances
    when you are not in the room.
    • Lighting without wall switches.
    • Activate lighting sequences
    • Protect your home by early warning of unexpected visitorsTechInfo: • Batteries: 2 x 'AAA' cells
    • RF Frequency: 433.92 MHz
    • RF Frequency: 30m free air
    • Output: 1mW
    • PIR Range:12m at 0° ; - 5 m at 45 °
    • Approvals:
    • Radio: I-ETS 300220
    • EMC: EN300220
    • CE Mark
    • Ambient temperature:
    - 10°C to + 30° C (operation)
    - 20° C to + 70° C (storage)
    • Dimensions:
    67 x 67 x 27 mm
    (width x height x depth)







    Los clientes que compraron este producto tambien han comprado

    Universal Alarm Interface

    SM10E
    €44,99 IVA incluido
    Connects to an existing system and turns on lights when tripped. It has 3 modes of operation:
    In mode 1 the SM10 will turn On all Lamp Modules and Wall Switch Modules set to its House code, and will also turn On any other Modules set to its Unit code, a stereo connected to an Appliance Module, for example. All Lamp Modules and Wall Switch Module are left in the On state when the system is deactivated, but the Module set to the same Unit code as the SM10 will turn Off.
    In mode 2 the SM10 will FLASH all lights connected to Lamp Modules or Wall Switch Modules. All Lamp and Wall Switch Modules will be left in the On state when the system is de-activated but Appliance modules set to the same House code as the SM10 will turn Off.
    In mode 3 the SM10 will turn ON any Module set to the same House Code and Unit Code as the SM10 when the system is activated and turns it OFF when the input contact is opened.
    Set the input switch to A for triggering the interface by a low voltage input (6-8 V AC, DC or audio), to B for triggering the interface by a dry contact closure. Do not connect 220V to the input terminal!
    The SM10 has a test button which allows you to activate it whether or not it is connected to a system. The All light off button allows you to turn off anything which has been turned on by the interface.
    To install the SM10 (is expected to be installed inside the security controller panel) :
    • Connect the system output to the screw terminals.
    • Connect the flying lead to the 230V power supply, most likely at the 230V side of the transformer.

    Encrypted remote control 8 in 1 - touch screen (IR+RF+X10)

    S4073
    €61,50 IVA incluido
    The 4073 is a universal command with a tactile screen, with a backlight of deep blue, especially geared towards the control of X-10 devices by encrypted radio frequency (RF) and infrared (IR) signals, allowing however the control of 4 multimedia devices (DVD, TV, etc.) by IR. It is compatible with the X-10 RF encrypted receiver S4022, being able to control all the house codes, unit codes and the X-10 commands “On”, “Off”, “All Lights On”, “All Units Off”, “Dim” and “Bright”.
    Its memory is well adapted to the day-by-day needs, being able to store 4 macros with up to 8 commands each and to learn IR commands to control 4 different devices.
    It has a keyboard lock and is supplied with a docking base to be applied to the wall.