Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Fibaro

    Fibaro Double Smart Module

    €77.49 incl tax
    The remotely operated FIBARO Double Smart Module is designed to turn electrical devices or circuits on and off.
    The Double Smart Module (FGS-224) allows to control two devices or circuits.
    The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.
    SKU: ZWFIB FGS-224
    Ship to
    *
    *
    Shipping Method
    Name
    Estimated Delivery
    Price
    No shipping options
    Availability: In stock

    Features

    • Works with various types of switches and buttons.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
    • May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

    The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

    Specifications

    Power supply

    100-240V~ 50/60Hz or 24-30V DC

    Rated load current

    Double Smart Module (FGS-224):
    6A per one channel
    9.5A total

    Compatible load types

    resistive or incandescent only

    Active element

    micro-gap relay μ

    Maximum length of wires

    3 meters

    Recommended wire cross-section area

    0.2–2.0mm2 (24–14 AWG)
    (depending on load current)

    Operating temperature

    0–35°C

    Ambient humidity

    0–95% RH without condensation

    Radio protocol

    Z-Wave (500 series chip)

    Radio frequency band

    868.0–868.6MHz; 869.7–870.0MHz

    Max. transmitting power

    +5dBm

    Range

    up to 50m outdoors
    up to 40m indoors
    (depending on terrain and building structure

    Dimensions
    (Height x Width x Depth)

    42.5 x 38.25 x 20.3 mm

    Classification of installation and use

    Automatic electrical control for use in equipment for household or similar use

    Mode of operation

    Type 1.C Action

    Pollution degree

    2

    Software class

    Class A

    Protection against electric shock class

    Class 0

    Compliance with EU directives

    2011/65/EU
    2015/863
    2014/53/EU

    manuals:

    Operating manual – English

    Short manual – Multilanguage

    Write your own review
    • Only registered users can write reviews
    *
    *
    • Bad
    • Excellent
    *
    *
    *
    *

    Features

    • Works with various types of switches and buttons.
    • Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
    • Works as a Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network).
    • May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

    The device is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

    Specifications

    Power supply

    100-240V~ 50/60Hz or 24-30V DC

    Rated load current

    Double Smart Module (FGS-224):
    6A per one channel
    9.5A total

    Compatible load types

    resistive or incandescent only

    Active element

    micro-gap relay μ

    Maximum length of wires

    3 meters

    Recommended wire cross-section area

    0.2–2.0mm2 (24–14 AWG)
    (depending on load current)

    Operating temperature

    0–35°C

    Ambient humidity

    0–95% RH without condensation

    Radio protocol

    Z-Wave (500 series chip)

    Radio frequency band

    868.0–868.6MHz; 869.7–870.0MHz

    Max. transmitting power

    +5dBm

    Range

    up to 50m outdoors
    up to 40m indoors
    (depending on terrain and building structure

    Dimensions
    (Height x Width x Depth)

    42.5 x 38.25 x 20.3 mm

    Classification of installation and use

    Automatic electrical control for use in equipment for household or similar use

    Mode of operation

    Type 1.C Action

    Pollution degree

    2

    Software class

    Class A

    Protection against electric shock class

    Class 0

    Compliance with EU directives

    2011/65/EU
    2015/863
    2014/53/EU

    manuals:

    Operating manual – English

    Short manual – Multilanguage

    Customers who bought this item also bought

    Roller shutter 3

    ZWFIB FGR-223
    €77.49 incl tax
    Fibaro Roller Shutter 3 is a universal, Z-Wave PLUS compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches.
    Availability: In stock

    Double Switch 2 - Relay Insert 2 * 1.5 KW Z-Wave Plus

    ZWFIB FGS-223
    €77.49 incl tax
    FIBARO Double Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
    Availability: In stock

    Relay Insert 2 * 1.5 KW

    ZWPHI PAN06
    €59.99 incl tax
    The Philio Insert Switch allows controlling two independent loads both wirelessly via Z-Wave and locally utilizing a traditional wall switch. Thanks to its calibration technology the PAN06 cannot only be used to switch AC devices ON and OFF, it also works perfectly with many kind of light, e.g. incandescent, fluorescent and LEDs. In addition to this, the PAN06 can be connected to 12V/DC, which makes it possible to switch 12V MR-16 light as well. The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the insert that is controlling the load. This device is designed for a 3 wire system and needs a neutral wire in the wall box.
    Availability: In stock

    Single Switch 2 - Relay Insert 1 channel Switch2 Z-Wave Plus

    ZWFIB FGS-213
    €77.49 incl tax
    FIBARO Single Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
    Availability: In stock

    Dimmer 2 - 250W Universal Insert Module

    ZWFIB FGD-212
    €77.49 incl tax
    Z-Wave Fibaro Universal Dimmer 2 250W
    FIBEFGD-212
    FGD-212

    Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
    New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).
    Availability: In stock