Intelligent lighting dimmer with integrated light switch. Works with commercially available lighting source such as: LED diodes, compact lamps, traditional bulbs and halogen lamps. The device is equipped with automatic calibration functions and active power and energy measurement.
An intelligent switch integrated with the button used in a system with one or two independently controlled loads. Designed for quick installation in sockets. Equipped with a LED ring and functionalities known from Fibaro modules.
The FIBARO CO sensor will make your home safer and prevents danger caused from the ‘silent killer’ carbon monoxide (CO). The sensor detects reliable carbon monoxide in the air and alarms in case of exceeded limits. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning.
The device alarms via an integrated siren and blinking LED. Additionally, automatic scenes can be triggered within the Z-Wave gateway and notifications can be sent.
Additionally the device is equipped with a temperature sensor.
The FIBARO CO Sensor is a life-saving device, therefore tests to conform compliance with the applicable requirements of the standard EN 50291-1:2010 are conducted by the BSI Group accredited testing laboratory.
Availability:Out of Stock - on backorder and will be dispatched once in stock.
The Fibaro Smoke Sensor is a universal, optical Z-Wave Plus smoke sensor. The device is battery operated (battery life of up to 3 years).
Smoke detection is signaled through siren and LED diode blinking.
The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperature threshold is exceeded.
The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).
Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination. Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.
Smarter. Safest. Smaller still. Plug it. Automate it. Control it. Understand how much electricity you are spending. Smart Switch 7 is Aeotec's smallest smart plug and is also everyone's safest.
Intelligence is in control. Appliances turn on when needed and off when not. On a schedule. Or intelligently automated and triggered when needed. You are completely in control. It is smart because it can be automated. But it's also a smart plug because the power to turn it on or off manually is always yours.
In real time and with 99% accuracy, Smart Switch 7 will analyse appliances electricity consumption helping you save what you spend. Furthermore the Smart Switch 7 is one of the best in design and quality. European design, German engineering and SGS certfication make Smart Switch 7 the smallest and safest smart plug.
Availability:Usually available for shipment within 4-6 business days after ordering.
The Aeon Labs Micro Smart Energy Illuminator is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.